B-Box HVS+ 7.7 + PLENTICORE PLUS 7.0 G2
HV storage system, 7.68 kWh usable, 3-phase
Art-No.
0162246
Product details
Product information "B-Box HVS+ 7.7 + PLENTICORE PLUS 7.0 G2"
The PLENTICOINs required for power and function activation must be ordered separately.
The inverter input current is increased to 15 amps via a firmware update.
Combination with components from the previous HVS series is not possible.
The new BYD Energy app including the latest firmware (from V1.28.0) is required for commissioning.
The included RJ45 termination connector for the data bus must be pre-assembled on-site. To do this, insert and crimp a wire jumper between pins 1 and 6 (viewed from above on the flat connector side with the pin contact surfaces, cable entry facing down, pins ascending from left to right). An actual resistor is not required.
HVS+/HVM+ and Kostal: approved by the manufacturers on both sides
A true veteran in the field of storage packages: Kostal Plenticore Plus G2 and BYD HVS. There is now also a ‘+’ for the latest generation of HVS high-voltage storage systems from BYD. In addition to the proven properties and key data, an improved BCU has been used in the new HVS+. This can be used flexibly for the storage modules of the HVB, HVS+ and HVM+ series. The new automatic SOC balancing optimiser eliminates the need to manually adjust the charge level during initial installation and expansion. The revised BCU connection management with connectors on the power and communication level saves further valuable time during installation. It is no coincidence that this is one of our top combinations in our broad portfolio of storage packages.
Product benefits:
• Proven and powerful storage package
• Automatic SOC balancing during initial installation or expansion
• Faster cable installation thanks to connectors
• Storage can be expanded indefinitely
Product features System:
• AC nominal power: 7 kW
• Feed-in phases: 3
• AC mains voltage: 400 V
• Number of MPPT: 2 + 1 (PV / Bat)
• Max. DC input voltage: 1000 V
• DC plug type: Sunclix
• Communication: Wifi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out
• Protection class: IP65
• Cooling: active
• Dimensions: 563 x 405 x 233 mm (H x W x D)
• Weight: 21.6 kg
Product features storage:
• Battery capacity (usable): 7.68 kWh
• Storage type: High-voltage
• Nominal voltage: 307.2 V
• Extension time window: unlimited
• Number of storage modules in one unit: 2 to 5 battery modules
• Number of units in parallel: 3
• Cell chemistry: LFP
• COM connections: RJ45
• BAT connections: MC4
• Protection class: IP55
• Dimensions: 987 x 610 x 282 mm (H x W x D)
• Weight: 130.1 kg
Activation via PLENTICOINs:
General (all G1/G2 Plenticore plus series, MP plus series, Enector Wallbox):
Activation of the storage function: 1 PLENTICOIN
Activation of the Wallbox Smart Features: 2 PLENTICOINs
Scope of delivery:
• 1 x Kostal Plenticore Plus 7.0 G2 hybrid inverter (item 0152313)
• 1 x BYD B-Box HV+ BCU + Base (item 0161507)
• 3 x BYD HVS+ storage modules (item 0161506)
• 1 x Kostal KSEM G2 smart meter (item 0151118)
Caution
| Dangerous goods transportation category | 2 |
|---|---|
| Dangerous goods description | LITHIUM ION BATTERIES |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| Dangerous goods Weight (net) (kg) | 115.500 |
| UN No. | 3480 |
Downloads
-
SMART ENERGY METER G20151118
-
Battery-Box HVS+ 2,56 kWh0161506
-
Plenticore Plus 7.0 G2 hybrid inverter0152313
-
B-Box HV-BCU + Base0161507
-
SMART ENERGY METER G20151118
-
Battery-Box HVS+ 2,56 kWh0161506
-
Plenticore Plus 7.0 G2 hybrid inverter0152313
Technical details
| Topology | transformerless |
|---|---|
| MPP min. voltage range input (V) | 290.00 |
| Surge protection DC | no |
| Max. nominal charging power (kW) | 4.60 |
| Max. AC power (kVA) | 7.00 |
| Max. efficiency (%) | 97.20 |
| Backup system light | no |
| Display | with display |
| Start input voltage (V) | 150 |
| Backup system full | no |
| Arc Fault Circuit Interrupter | no |
| Number of independent MPPT (pcs) | 3 |
| Min. temperature ambient (°C) | -10 |
| Max. output current (A) | 10.10 |
| European efficiency (%) | 96.50 |
| Max. input current per MPPT (A). | 15 |
| Max. input voltage DC (V) | 1000.00 |
| Commercial system | no |
| Usable capacity (kWh) | 7.68 |
| Feed-in phases | 3 |
| Rapid shutdown | no |
| Capacity extendable later | yes without restriction |
| Surge protection AC | no |
| Max. short circuit current per MPPT (A) | 21 |
| Max. input current DC (A) total | 45.00 |
| Max. generator power DC (kWp) | 10.50 |
| Battery cell chemistry | LFP |
| Max. discharging power (kW) | 4.60 |
| MPP max. voltage range input (V) | 720.00 |
| Integrated DC switch | yes |
| Offgrid usable | no |
| Protection degree | IP55 |
| Total number of string inputs | 3 |
| Max. short circuit current (A) total | 63.00 |
| Contact ripple control receiver | yes |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| Shadow management | yes |
| DC connection | SUNCLIX |
| AC nominal power (kW) | 7.00 |
| Intrastat country of origin | China |
|---|---|
| Dangerous goods transportation category | 2 |
| Dangerous goods description | LITHIUM ION BATTERIES |
| Manufacturer | BYD + Kostal |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Intrastat product number (HS-code) | 85076000 |
| Dangerous goods class | 9 |
| Manufacturer item name | HVS+ 7.7*PLENTICORE PLUS 7.0 G2 |
| Dangerous goods packaging type | 4G |
| Dangerous goods Weight (net) (kg) | 115.500 |
| UN No. | 3480 |
| Weight incl. packaging (Kg) | 161.960 |
|---|
| Weight without packaging (kg) | 148.260 |
|---|
