The combination with components from the previous HVS series is not possible.
The included RJ45 termination connector for the data bus requires on-site assembly. This involves inserting and crimping a wire bridge between pins 1 and 6 (viewed from above on the flat side of the connector with the pin contact surfaces, cable entry facing downwards, pins ascending from left to right). No actual resistor is required.
Even an innovative system like the Fronius GEN24 constantly needs new impetus for improvement. The new SC version of the Primo and Symo series now receives an upgrade for DC input currents. The GEN24 SC plus version is delivered with the battery connection already activated at the factory. Of course, the version with the battery port deactivated is still available – distinguishable by the "plus" after GEN24 SC in the device name. Here, you decide whether and when to use it. The smart PV-Point emergency power connection with a maximum output of 3 kW is active in every version. Here, it is combined with the new HVS+ storage system from BYD. The automatic SOC balancing optimizer eliminates the need for manual adjustment of the charge level during initial installation and expansion. The revised BCU connection management with connectors at the power and communication levels saves even more.
Product advantages:
•Proven and high-performance hybrid system
•Emergency power via Fronius PV-Point, optionally also for continuous use
•Backup power possible with Enwitec transfer switch
•Automatic SOC balancing during initial installation or storage expansion
•Storage capacity can be expanded indefinitely
Product Specifications System:
•AC Power: 12.0 kW
•Power Phases: 3
•AC Mains Voltage: 400 V
•Number of MPPTs: 2
•DC Input Current: MPPT 1 - 28.0 A, MPPT 2 - 14.0 A
•Communication: WLAN, Ethernet, 2 x RS485
•Interfaces: 6 x DI (FRE), 6 x DO
•Protection Class: IP66
•Cooling: Active
•Dimensions: 595 x 529 x 180 mm (H x W x D)
•Weight: 22.8 kg
Storage system product specifications:
•Battery capacity (usable): 12.8 kWh
•Storage type: High Voltage
•Nominal Voltage: 512.0 V
•Expansion Timeframe: Unlimited
•Number of storage modules in one unit: 2 to 5 battery modules
•Number of units in parallel: 3
•Cell chemistry: LFP
•COM ports: RJ45
•BAT ports: MC4
•Protection class: IP55
• Dimensions: 1467 x 610 x 282 mm (H x W x D)
•Weight: 207.1 kg
Scope of delivery:
•1 x Fronius Symo GEN24 12.0 SC Plus Hybrid Inverter (Item 0156755)
Are you a business customer and have a question about one of our products? Send us a message using this inquiry form. We look forward to your message and will get back to you as soon as possible.
The displayed date indicates the next possible shipping date based on our current information. Your sales contact will gladly advise you on alternative products that may be available sooner.
Based on valuable customer feedback, we have updated our shipping address form. We would therefore kindly ask you to check whether your saved shipping addresses are still correct and complete.
The following changes have been implemented:
• The 'Company/Name' field is now mandatory.
• The 'First name' and 'Last name' fields have been removed.
Please enter the recipient’s full name in the “Company/Name” field from now on.
• New 'Contact person' field:
If applicable, you may enter a contact person here for notification purposes related to your order.