Backup controller for GEN24 plus + Verto Plus*

A power cut like this is always inconvenient, one swift digger driver and bang - the whole street goes dark. Even if you don't really want to plan for such a situation, the technical possibility of an independent backup power supply creates an unimagined sense of security. Both the GEN24 plus and the new Verto Plus series can be conveniently supplemented with the Fronius Backup Controller at any time. With the automatically switching unit, all important consumers are quickly supplied with power again in the event of a power failure. For all those for whom 3 kW emergency power via the Fronius PV Point is not quite enough.

Product advantages:

- Automatic switching incl. FRT function in accordance with EN 50549-10

- Compatible with Fronius Primo GEN24, Symo GEN24 plus and Verto Plus*

Product features:

- Nominal output: 24 kW

- Max. Max. through-current: 35 A

- AC connection: 400 V, 3-phase

- Type of mains disconnection: 3-pole

- Mains type: suitable for all mains types

- Max. Cable cross-section: 10 mm² (push-in terminals)

- Mounting: on top-hat rail in switch cabinet

- Protection class: IP20

- Dimensions: 8 HP / 100 x 144 x 66 mm (HxWxD)

- Included in the scope of delivery: mandatory information sticker ‘Emergency power supply’

*Due to the design of the Fronius Symo GEN24 3.0 - 5.0 and all Primo GEN24-US versions, a full-backup solution cannot be implemented. Due to the current limit of 35 A, only the 15-20 kW power classes of the Verto Plus devices can be used.

Authorised for use in the following countries:

All EU countries, Australia, Turkey, Argentina, Chile, Uruguay and Peru.

The requirement for mains disconnection (3P or 3PN all-pole) must be clarified with the local mains operator.