BYD HVM+ 8.3 + PLENTICORE MP M G3

This combination will liven things up. The flexible single-phase Kostal Plenticore MP G3 series with the proprietary PLENTICOIN currency and the new BYD HVM+ high-voltage storage system. For inverters with the S and M device variants, higher performance classes, storage utilization, and intelligent connection to the EV charger can be activated using PLENTICOINs – at any time. The new HVM* series from BYD, in addition to its proven features and key data, has an improved BCU. This can be used flexibly for the storage modules of the HVB, HVS+, and HVM+ series. The new automatic SOC balancing optimizer eliminates the need for manual adjustment of the charge level during initial installation and expansion. The revised BCU connection management with connectors at the power and communication levels saves even more valuable time during installation.

Product advantages:

• Activate performance and functions as needed using PLENTICOINs

• 17 A input current per MPPT

• Full backup with external transfer switch

• Automatic SOC balancing during initial installation or expansion

• Faster cable installation thanks to connectors

System product features:

• AC base power: 5.0 kW

• AC power extension stage 6.0 kW

• AC power extension stage 2: 7.0 kW

• AC connection: 230 V, single-phase

• Number of MPPTs: 2 + 1 (PV / Bat)

• MPPT input voltage: 75 – 900 V

• Surge protection: DC Type 2 can be added optionally

• Communication: Wi-Fi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out

• Protection class: IP65

• Cooling: Active

• Dimensions: 561 x 409 x 237 mm (H x W x D)

• Weight: 22.3 kg

*Throttled to 4.6 kVA in Germany according to VDE-AR-N 4105

Storage product features:

• Battery capacity (usable): 8.28 kWh

• Storage type: High-voltage

• Nominal voltage: 153.6 V

• Expansion time window: unlimited

• Number of storage modules in one unit: 3 to 8

• Number of units in parallel: 3

• Cell chemistry: LFP

• COM ports: RJ45

• BAT ports: MC4

• Protection class: IP55

• Dimensions: 987 x 610 x 282 mm (HxWxD)

• Weight: 138.8 kg

Adaptations without PLENTICOINs:

The power expansion for version S and the base power for version M are freely selectable to a limited extent, for example, to comply with local grid connection requirements (version M with 4.6 instead of 5.0 kVA according to VDE-AR-N 4105 in Germany).

Activations using PLENTICOINs:

Increase by one power class (1 level) within the S / M device series: 1 PLENTICOIN

Increase to maximum power (2 levels) within the M device series: 1+1 PLENTICOIN

Activation of the storage function: 2 PLENTICOINS

Activation of the convenience function (excess charging wallbox, §14a, etc.): 2 PLENTICOINS

Scope of delivery:

• 1 x Kostal Plenticore MP M G3 hybrid inverter (item 0159083)

• 1 x BYD B-Box HV+ BCU + Base (item 0161507)

• 3 x BYD HVM+ storage modules (item 0161505)

• 1 x Kostal KSEM G2 smart meter (item 0151118)