B-Box HVS+ 7.7 + GW6000-ET-20 G2
HV storage system, 7.68 kWh usable, 3-phase
Art-No.
0162411
Product details
Product information "B-Box HVS+ 7.7 + GW6000-ET-20 G2"
The included communication dongle meets cybersecurity requirements.
Combination with components from the previous HVS series is not possible.
The included RJ45 terminating connector for the data bus must be pre-assembled on site. To do this, insert and crimp a wire jumper between pins 1 and 6 (viewed from above on the flat connector side with the pin contact surfaces, cable entry facing down, pins ascending from left to right). An actual resistor is not required.
The second generation of the Goodwe ET-20 hybrid series ranges from 6 to 15 kW and is ideal for many residential applications. The successor to the previous ET+ series has been enhanced and improved in many areas. With the familiar 16 amp input current per MPP tracker, all current module series can be connected. With an integrated smart meter including 3 Cts, a communication dongle, AC+DC surge protection, and AFCI arc detection, the system is complete. The proven backup connection provides uninterrupted power to selected circuits. This is combined with the new HVS+ series from BYD. Thanks to the new BCU, it can be flexibly used for storage modules from the HVB, HVS+, and HVM+ series. The new automatic SOC balancing optimizer eliminates the need for manual adjustment of the charge level during initial installation and expansion. The revised BCU connection management with connectors at the power and communication levels saves even more valuable time during installation.
Product advantages:
• 16 A input current per MPPT
• 3 x CTs + Wi-Fi-LAN dongle with cyber security included
• Automatic SOC balancing during initial installation or expansion
• Faster cable installation thanks to connectors
• Can be retrofitted without time limit
System product features:
• AC nominal power: 6.0 kW
• Feed-in phases: 3
• AC grid voltage: 400 V
• Number of MPP trackers: 2
• Max. DC input voltage: 1000 V
• AFCI arc detection: yes – version 3.0
• DC surge protection: Type 2
• AC surge protection: Type 2
• Storage type: high voltage
• Backup power capability: yes, via EPS connection
• Interfaces: RS485, CAN, Wi-Fi, LAN
• Protection class: IP66
• Cooling: passive
• Dimensions: 460 x 496 x 221 mm (HxWxD)
• Weight: 23.0 kg
Storage product features:
• Battery capacity (usable): 7.68 kWh
• Storage type: High-voltage
• Nominal voltage: 307.2 V
• Expansion time window: Unlimited
• Number of storage modules in one unit: 2 to 5 battery modules
• Number of units in parallel: 3
• Cell chemistry: LFP
• COM ports: RJ45
• BAT ports: MC4
• Protection class: IP55
• Dimensions: 987 x 610 x 282 mm (HxWxD)
• Weight: 130.1 kg
Scope of delivery:
• 1 x Goodwe GW6000-ET-20 G2 Hybrid Inverter (item 0160689)
• 1 x BYD Battery-Box HV-BCU (item 0161507)
• 3 x BYD Battery-Box HVS+ storage modules (item 0161506)
Downloads
-
Battery-Box HVS+ 2,56 kWh0161506
-
GW6000-ET-20 G20160689
-
B-Box HV-BCU + Base0161507
-
Battery-Box HVS+ 2,56 kWh0161506
-
GW6000-ET-20 G20160689
Technical details
| AC nominal power (kW) | 6.00 |
|---|---|
| Surge protection AC | type 2 |
| Contact ripple control receiver | yes |
| Number of independent MPPT (pcs) | 2 |
| Arc Fault Circuit Interrupter | yes |
| Surge protection DC | type 2 |
| Display | w/o display |
| Feed-in phases | 3 |
| Backup system light | yes |
| European efficiency (%) | 97.20 |
| Protection degree | IP55 |
| Total number of string inputs | 2 |
| Commercial system | no |
| Integrated AC switch | no |
| Integrated DC switch | yes |
| Capacity extendable later | yes without restriction |
| Contact for self-consumption optimization (e.g. for heat pump) | 1 |
| Max. AC power (kVA) | 6.00 |
| Max. output current (A) | 8.70 |
| Max. generator power DC (kWp) | 9.60 |
| Max. input voltage DC (V) | 1000.00 |
| Max. input current DC (A) total | 32.00 |
| Max. input current per MPPT (A). | 16 |
| Max. discharging power (kW) | 6.60 |
| Max. short circuit current (A) total | 48.00 |
| Max. short circuit current per MPPT (A) | 24 |
| MPP max. voltage range input (V) | 850.00 |
| Max. nominal charging power (kW) | 7.68 |
| Max. efficiency (%) | 98.00 |
| MPP min. voltage range input (V) | 120.00 |
| Min. temperature ambient (°C) | -10 |
| Usable capacity (kWh) | 7.68 |
| Start input voltage (V) | 150 |
| Topology | transformerless |
| Battery cell chemistry | LFP |
| Dangerous goods description | LITHIUM ION BATTERIES |
|---|---|
| Dangerous goods Weight (net) (kg) | 115.500 |
| Dangerous goods class | 9 |
| Dangerous goods transportation category | 2 |
| UN No. | 3480 |
| Dangerous goods packaging type | 4G |
| Manufacturer | BYD + Goodwe |
| Manufacturer item name | HVS+ 7.7*B-Box HV-BCU + Base*GW6000-ET-20 G2 |
| Intrastat country of origin | China |
| Intrastat product number (HS-code) | 85076000 |
| Classification code | M4 |
| Tunnel restriction code | (E) |
| Weight incl. packaging (Kg) | 151.600 |
|---|
| Weight without packaging (kg) | 138.500 |
|---|
