B-Box HVM+ 13.8 + Verto plus 15.0 SPD I+II
HV storage system, 13.80 kWh, 15.0 kW, 3-phase
Art-No.
0165386
Product details
Product information "B-Box HVM+ 13.8 + Verto plus 15.0 SPD I+II"
The included RJ45 termination connector for the data bus requires on-site assembly. This involves inserting and crimping a wire bridge between pins 1 and 6 (viewed from above on the flat side of the connector with the pin contact surfaces, cable entry facing downwards, pins ascending from left to right). No actual resistor is required.
Just as with the Fronius GEN24 units, the "plus" makes the difference in the new Verto series. Verto Plus hybrid inverters come factory-equipped with a high-performance high-voltage battery connection. With power ratings ranging from 15 to 33 kW, they are ideal system components for the small commercial sector. Their comprehensive communication features are complemented by AC and DC surge protection and Fronius Arc Guard Technology. High safety standards also extend to data security, with servers located in Europe. In this instance, the system is paired with the BYD HVM+ battery. The automatic SOC balancing optimizer eliminates the need for manual state-of-charge adjustments during initial installation or system expansion. Additionally, the redesigned BCU connection management—featuring plug-in connectors for both power and communication—saves valuable installation time.
Product advantages:
• Proven, high-performance hybrid system
• Emergency power via Fronius PV Point
• 3-phase backup power possible with Fronius Backup Switch + Controller
• Automatic SOC balancing during initial installation or storage expansion
• Storage capacity expandable indefinitely
System product specifications:
• AC nominal power: 15.0 kW
• Grid connection: 3-phase
• AC grid voltage: 400 V
• Number of MPPTs: 3
• Max. DC input voltage: 1000 V
• Max. DC input current: 28 A per MPPT
• DC surge protection: Type 1+2
• AC surge protection: Type 2
• DC connector type: PV – Stäubli MC4, Bat – Stäubli MC4 Evo Stor
• Number of battery connections: 1
• Communication: WLAN, Ethernet
• Interfaces: 2 x RS485, 6 x DI (ripple control receiver), 6 x DO
• Protection class: IP66
• Cooling: Active
• Weight: 43.0 kg
• Dimensions: 865 x 574 x 279 mm (H x W x D)
• Warranty: 2 years + an additional 3 years upon free registration
Product features Storage:
• Battery capacity (usable): 13.8 kWh
• Storage type: High voltage
• Nominal voltage: 256.0 V
• Expansion time window: Unlimited
• Number of storage modules in one unit: 4 to 8
• Number of units in parallel: 3
• Cell chemistry: LFP
• COM ports: RJ45
• BAT ports: MC4
• Protection class: IP55
• Dimensions: 1467 x 610 x 282 mm (H x W x D)
• Weight: 221.6 kg
Scope of delivery:
• 1 x Fronius Verto Plus 15.0 hybrid inverter (Item 0159332)
• 1 x Fronius Smart Meter TS 65A-3 (Item 0151650)
• 1 x BYD B-Box HV BCU + Base (Item 0161507)
• 5 x BYD HVM+ battery module (Item 0161505)
Caution
| Dangerous goods transportation category | 2 |
|---|---|
| Dangerous goods description | LITHIUM ION BATTERIES |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Dangerous goods class | 9 |
| Dangerous goods Weight (net) (kg) | 206.500 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
Downloads
-
Battery-Box HVM+ 2,76 kWh0161505
-
Verto Plus 15.00159332
-
Fronius Smart Meter TS 65A-30151650
-
B-Box HV-BCU + Base0161507
-
Battery-Box HVM+ 2,76 kWh0161505
-
Verto Plus 15.00159332
-
Fronius Smart Meter TS 65A-30151650
Technical details
| Topology | transformerless |
|---|---|
| Max. input current DC (A) total | 84.00 |
| Decibel | 50 |
| Total number of string inputs | 6 |
| Backup system full | yes with supply |
| Start input voltage (V) | 150 |
| MPP max. voltage range input (V) | 870.00 |
| Max. discharging power (kW) | 5.63 |
| Number of independent MPPT (pcs) | 3 |
| Min. temperature ambient (°C) | -10 |
| Max. input voltage DC (V) | 1000.00 |
| Commercial system | no |
| Surge protection AC | type 2 |
| Max. efficiency (%) | 98.03 |
| Capacity extendable later | yes without restriction |
| Max. AC power (kVA) | 15.00 |
| Usable capacity (kWh) | 13.80 |
| Display | w/o display |
| Max. short circuit current per MPPT (A) | 50 |
| MPP min. voltage range input (V) | 180.00 |
| Max. nominal charging power (kW) | 5.63 |
| Battery cell chemistry | LFP |
| DC connection | spring-type terminal |
| Integrated DC switch | yes |
| Backup system light | yes with supply |
| Max. generator power DC (kWp) | 22.50 |
| Offgrid usable | no |
| Max. output current (A) | 21.70 |
| Protection degree | IP55 |
| AC nominal power (kW) | 15.00 |
| Contact ripple control receiver | yes |
| Grid protection | yes |
| Integrated AC switch | no |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| Arc Fault Circuit Interrupter | yes |
| Max. input current per MPPT (A). | 28 |
| Max. short circuit current (A) total | 150.00 |
| Surge protection DC | type 1 and type 2 |
| European efficiency (%) | 97.35 |
| Dangerous goods transportation category | 2 |
|---|---|
| Dangerous goods description | LITHIUM ION BATTERIES |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Intrastat product number (HS-code) | 85076000 |
| Manufacturer item name | HVM+ 13.8*Verto plus 15.0 SPD I+II*Smart Meter |
| Dangerous goods class | 9 |
| Manufacturer | BYD + Fronius |
| Dangerous goods Weight (net) (kg) | 206.500 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
| Weight incl. packaging (Kg) | 289.050 |
|---|
| Weight without packaging (kg) | 264.840 |
|---|
