B-Box HVM+ 11.0 + Symo GEN24 SC 12.0 Plus
HV storage system, 11.04 kWh usable, 3-phase
Art-No.
0162930
Product details
Product information "B-Box HVM+ 11.0 + Symo GEN24 SC 12.0 Plus"
The combination with components from the previous HVM series is not possible.
The included RJ45 termination connector for the data bus requires on-site assembly. This involves inserting and crimping a wire bridge between pins 1 and 6 (viewed from above on the flat side of the connector with the pin contact surfaces, cable entry facing downwards, pins ascending from left to right). No actual resistor is required.
Even an innovative system like the Fronius GEN24 needs continuous improvements. The new SC version of the Primo and Symo series now receives an upgrade for its DC input currents. The GEN24 SC plus version is delivered with the battery connection already activated at the factory. Of course, the version with the battery port deactivated is still available – identifiable by the "plus" after GEN24 SC in the device name. You decide whether and when to use it. The smart PV-Point emergency power connection with a maximum output of 3 kW is active in every version. Here, it's combined with the BYD HVM+ battery. The automatic SOC balancing optimizer eliminates the need for manual adjustment of the charge level during initial installation and expansion. The redesigned BCU connection management with connectors at the power and communication levels saves even more valuable installation time.
Product advantages:
• Proven and high-performance hybrid system
• Emergency power via Fronius PV-Point, optionally also for continuous use
• 3-phase backup power possible with Fronius Backup Switch + Controller
• Automatic SOC balancing during initial installation or storage expansion
• Storage capacity expandable indefinitely
Product features System:
• AC Power: 12.0 kW
• Power Phases: 3
• AC Mains Voltage: 400 V
• Number of MPPTs: 2
• DC Input Current: MPPT 1 - 28.0 A, MPPT 2 - 14.0 A
• Battery Connection: Active
• Communication: WLAN, Ethernet, 2 x RS485
• Interfaces: 6 x DI (FRE), 6 x DO
• Protection Class: IP66
• Cooling: Active
• Dimensions: 595 x 529 x 180 mm (H x W x D)
• Weight: 22.8 kg
Product features Storage:
• Battery capacity (usable): 11.04 kWh
• Storage type: High voltage
• Nominal voltage: 204.8 V
• Expansion time window: Unlimited
• Number of storage modules in one unit: 4 to 8
• Number of units in parallel: 3
• Cell chemistry: LFP
• COM ports: RJ45
• BAT ports: MC4
• Protection class: IP55
• Dimensions: 1227 x 610 x 282 mm (H x W x D)
• Weight: 180.2 kg
Scope of delivery:
• 1 x Fronius Symo GEN24 12.0 SC Plus hybrid inverter (item 0156755)
• 1 x Fronius Smart Meter TS 65A-3 (item 0151650)
• 1 x BYD B-Box HV BCU + Base (item 0161507)
• 4 x BYD HVM+ storage module (item 0161505)
Downloads
-
Battery-Box HVM+ 2,76 kWh0161505
-
Fronius Smart Meter TS 65A-30151650
-
Symo GEN24 SC 12.0 Plus0156755
-
B-Box HV-BCU + Base0161507
-
Battery-Box HVM+ 2,76 kWh0161505
-
Fronius Smart Meter TS 65A-30151650
-
Symo GEN24 SC 12.0 Plus0156755
Technical details
| AC nominal power (kW) | 12.00 |
|---|---|
| Surge protection AC | no |
| Contact ripple control receiver | yes |
| Number of independent MPPT (pcs) | 2 |
| Arc Fault Circuit Interrupter | no |
| DC connection | spring-type terminal |
| Surge protection DC | no |
| Decibel | 47 |
| Display | w/o display |
| Backup system light | no |
| Backup system full | yes with supply |
| European efficiency (%) | 97.90 |
| Protection degree | IP55 |
| Total number of string inputs | 3 |
| Commercial system | no |
| Integrated AC switch | no |
| Integrated DC switch | yes |
| Capacity extendable later | yes without restriction |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| Max. AC power (kVA) | 12.00 |
| Max. output current (A) | 17.40 |
| Max. generator power DC (kWp) | 18.00 |
| Max. input voltage DC (V) | 1000.00 |
| Max. input current DC (A) total | 42.00 |
| Max. input current per MPPT (A). | 28/14 |
| Max. discharging power (kW) | 4.50 |
| Max. short circuit current (A) total | 60.00 |
| Max. short circuit current per MPPT (A) | 40/20 |
| MPP max. voltage range input (V) | 800.00 |
| Max. nominal charging power (kW) | 4.50 |
| Max. efficiency (%) | 98.20 |
| MPP min. voltage range input (V) | 80.00 |
| Min. temperature ambient (°C) | -10 |
| Grid protection | yes |
| Offgrid usable | no |
| Usable capacity (kWh) | 11.04 |
| Start input voltage (V) | 80 |
| Topology | transformerless |
| Battery cell chemistry | LFP |
| Dangerous goods description | LITHIUM ION BATTERIES |
|---|---|
| Dangerous goods Weight (net) (kg) | 165.200 |
| Dangerous goods class | 9 |
| Dangerous goods transportation category | 2 |
| UN No. | 3480 |
| Dangerous goods packaging type | 4G |
| Manufacturer | BYD + Fronius |
| Manufacturer item name | HVM+ 11.0*Symo GEN24 12.0 PLUS SC*Smart Meter |
| Intrastat product number (HS-code) | 85076000 |
| Classification code | M4 |
| Tunnel restriction code | (E) |
| Weight incl. packaging (Kg) | 222.350 |
|---|
| Weight without packaging (kg) | 203.240 |
|---|
