Battery-Box HVB 8.9 + PLENTICORE M G3
Set
HV system, 8,5-12,5 kW, 8.91 kWh, 3-phase
Art-No.
0162601
Product details
Product information "Battery-Box HVB 8.9 + PLENTICORE M G3"
The 3 PLENTICOINs required to activate the storage function must be ordered separately.
The new BYD Energy app including the latest firmware (from V1.28.0) is required for commissioning.
The RJ45 terminating plug for the data bus included in the scope of delivery must be pre-assembled on site. For this purpose, a wire jumper must be inserted and crimped between pins 1 + 6 (view from above onto the flat connector side with the pin contact surfaces, cable entry facing downwards, pins ascending from left to right). An actual resistor is not required.
With the PLENTICORE G3 series, KOSTAL is expanding its flexible portfolio centred around the PLENTICOIN. This in-house currency for activating device power and functions is also used here. The inverters are supplied in 3 device variants S, M and L with a basic output of 4 to 15 kW. PLENTICOINs can be used to activate 2 higher power classes, storage utilisation and the intelligent connection of the EV charger. At any time. The 3 device versions thus enable almost universal application freedom with reduced storage requirements. In addition to the proven features and key data, an improved BCU has been used in the new HVB series from BYD. This can be used flexibly for the storage modules of the HVB, HVS+ and HVM+. The new automatic SOC balancing optimiser eliminates the need to manually adjust the charge level during initial installation and expansion.
Product benefits:
- Activate power and functions as required using PLENTICOINs
- 17A input current per MPPT
- Full backup with switchover device
- Automatic SOC balancing during initial installation or expansion
- Faster cable installation thanks to plug connectors
Product features System:
- AC base power: 8.5 kW
- AC power extension stage 1: 10.0 kW
- AC power extension stage 1: 12.5 kW
- Feed-in phases: 3
- AC mains voltage: 400 V
- Number of MPPT: 2 + 1 (PV / Bat)
- Max. DC input voltage: 1000 V
- DC plug type: Sunclix
- Communication: Wifi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out
- Protection class: IP65
- Cooling: active
- Dimensions: 561 x 409 x 237 mm (H x W x D)
- Weight: 22.3 kg
Product features Memory:
- Battery capacity (usable): 8.91 kWh
- Nominal voltage: 153.6 V
- Extension time window: unlimited
- Number of storage modules in one unit: 2 to 10
- Number of units in parallel: 3
- Cell chemistry: LFP
- Interfaces: RJ45, CAN, WLAN/LAN module (optional)
- BAT connections: MC4
- Protection class: IP55
- Dimensions: 585 x 610 x 282 mm (HxWxD)
- Weight: 96.0 kg
Activation via PLENTICOINs:
Plenticore G3 series:
Increase by one power class (1 level) within the S / M / L device series 1 PLENTICOIN
Increase to maximum power (2 levels) within the S / M / L device series 1+1 PLENTICOIN
Activation of the storage function 3 PLENTICOINS
Activation of the convenience function for the Enector Wallbox 2 PLENTICOINS
Scope of delivery:
- 1 x Kostal Plenticore M G3 Hybrid-WR (article 0155066)
- 1 x BYD B-Box HV+ BCU + Base (article 0161507)
- 3 x BYD HVB storage module (article 0161119)
- 1 x Kostal KSEM G2 Smart Meter (article 0151118)
Wichtige technische Daten
| Dangerous goods transportation category | 2 |
|---|---|
| Dangerous goods description | LITHIUM ION BATTERIES |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| Dangerous goods Weight (net) (kg) | 81.900 |
| UN No. | 3480 |
Downloads
-
SMART ENERGY METER G20151118
-
PLENTICORE G3 – M0155066
-
B-Box HV-BCU + Base0161507
-
Battery-Box HVB 2,97 kWh0161119
-
SMART ENERGY METER G20151118
-
PLENTICORE G3 – M0155066
-
Battery-Box HVB 2,97 kWh0161119
Technical details
| Topology | transformerless |
|---|---|
| Decibel | 39 |
| Surge protection DC | no |
| Max. short circuit current per MPPT (A) | 23,8\/23,8\/42 |
| Backup system full | yes with supply |
| Backup system light | no |
| Max. short circuit current (A) total | 89.60 |
| Display | with display |
| Max. input current DC (A) total | 64.00 |
| Arc Fault Circuit Interrupter | no |
| Number of independent MPPT (pcs) | 3 |
| European efficiency (%) | 97.21 |
| Start input voltage (V) | 95 |
| Max. input voltage DC (V) | 1000.00 |
| Max. efficiency (%) | 98.50 |
| Rapid shutdown | no |
| Capacity extendable later | yes without restriction |
| Surge protection AC | no |
| Min. temperature ambient (°C) | -20 |
| Max. output current (A) | 20.00 |
| Battery voltage | High Voltage |
| Max. AC power (kVA) | 8.50 |
| Battery cell chemistry | LFP |
| Usable capacity (kWh) | 8.91 |
| Integrated DC switch | yes |
| MPP max. voltage range input (V) | 800.00 |
| Protection degree | IP55 |
| Total number of string inputs | 3 |
| Max. generator power DC (kWp) | 12.75 |
| AC nominal power (kW) | 8.50 |
| Contact ripple control receiver | yes |
| Integrated AC switch | no |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| MPP min. voltage range input (V) | 170.00 |
| Shadow management | yes |
| Max. input current per MPPT (A). | 17\/17\/30 |
| Intrastat country of origin | China |
|---|---|
| Dangerous goods transportation category | 2 |
| Dangerous goods description | LITHIUM ION BATTERIES |
| Manufacturer | BYD + Kostal |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Manufacturer item name | HVB 8.9*PLENTICORE M G3 |
| Intrastat product number (HS-code) | 85076000 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| Dangerous goods Weight (net) (kg) | 81.900 |
| UN No. | 3480 |
| Weight incl. packaging (Kg) | 133.100 |
|---|
| Weight without packaging (kg) | 118.800 |
|---|
