BYD HVM+ 8.3 + PLENTICORE S G3
Set
HV-System, 4,0-7,0 kW, 8,28 kWh, 3-phase
Art-No.
0162256
Product details
Product information "BYD HVM+ 8.3 + PLENTICORE S G3"
The 3 PLENTICOINs required to activate the storage function must be ordered separately.
Combination with components from the previous HVS series is not possible.
The new BYD Energy app including the latest firmware (from V1.28.0) is required for commissioning.
The included RJ45 termination connector for the data bus must be pre-assembled on-site. To do this, insert and crimp a wire jumper between pins 1 and 6 (viewed from above on the flat connector side with the pin contact surfaces, cable entry facing down, pins ascending from left to right). An actual resistor is not required.
HVS+/HVM+ and Kostal: approved by the manufacturers on both sides
With the PLENTICORE G3 series, KOSTAL expands its flexible portfolio around the PLENTICOIN. This proprietary currency for unlocking device performance and functions is also used here. The inverters are delivered in three device variants: S, M, and L, with a base power of 4 to 15 kW. Using PLENTICOINs, two higher power classes, storage usage, and intelligent connectivity of the EV-Charger can be activated at any time. The three device versions thus enable almost universal application freedom with reduced storage requirements. For the new HVM+ series from BYD, an improved BCU has been used, which can be flexibly utilized for the storage modules of HVB, HVS+, and HVM+. The new automatic SOC-Balancing-Optimizer eliminates the need for manual adjustment of the charge level during initial installation and expansion.
Product benefits:
• Activate power and functions as required using PLENTICOINs
• 17 A input current per MPPT
• Full backup with switchover device
• Automatic SOC balancing during initial installation or expansion
• Faster cable installation thanks to plug connectors
Product features System:
• AC base power: 4.0 kW
• AC power extension stage 1: 5.5 kW
• AC power extension stage 1: 7.0 kW
• Feed-in phases: 3
• AC mains voltage: 400 V
• Number of MPPT: 2 + 1 (PV / Bat)
• Max. DC input voltage: 1000 V
• DC plug type: Sunclix
• Communication: Wifi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out
• Protection class: IP65
• Cooling: active
• Dimensions: 561 x 409 x 237 mm (H x W x D)
• Weight: 21.8 kg
Product features Memory:
• Battery capacity (usable): 8.28 kWh
• Storage type: High-voltage
• Nominal voltage: 153.6 V
• Extension time window: unlimited
• Number of storage modules in one unit: 2 to 5 battery modules
• Number of units in parallel: 3
• Cell chemistry: LFP
• COM connections: RJ45
• BAT connections: MC4
• Protection class: IP55
• Dimensions: 987 x 610 x 282 mm (HxWxD)
• Weight: 138.8 kg
Activation via PLENTICOINs:
Plenticore G3 series:
Increase by one power class (1 level) within the S / M / L device series 1 PLENTICOIN
Increase to maximum power (2 levels) within the S / M / L device series 1+1 PLENTICOIN
Activation of the storage function 3 PLENTICOINS
Activation of the convenience function for the Enector Wallbox 2 PLENTICOINS
Scope of delivery:
• 1 x Kostal Plenticore S G3 Hybrid-WR (Item 0155065)
• 1 x BYD B-Box HV+ BCU + Base (Item 0161507)
• 3 x BYD HVM+ memory module (item 0161505)
• 1 x Kostal KSEM G2 Smart Meter (Item 0151118)
Wichtige technische Daten
| Dangerous goods transportation category | 2 |
|---|---|
| Dangerous goods description | LITHIUM ION BATTERIES |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
| Dangerous goods Weight (net) (kg) | 123.900 |
Downloads
-
Battery-Box HVM+ 2,76 kWh0161505
-
SMART ENERGY METER G20151118
-
PLENTICORE G3 – S0155065
-
B-Box HV-BCU + Base0161507
-
SMART ENERGY METER G20151118
-
PLENTICORE G3 – S0155065
Technical details
| Topology | transformerless |
|---|---|
| Decibel | 39 |
| Max. generator power DC (kWp) | 6.00 |
| Surge protection DC | no |
| Backup system full | yes with supply |
| Backup system light | no |
| AC nominal power (kW) | 4.00 |
| Display | with display |
| Arc Fault Circuit Interrupter | no |
| Number of independent MPPT (pcs) | 3 |
| Min. temperature ambient (°C) | -10 |
| Max. AC power (kVA) | 4.00 |
| Start input voltage (V) | 95 |
| Max. input voltage DC (V) | 1000.00 |
| Max. input current per MPPT (A). | 17 |
| Rapid shutdown | no |
| Capacity extendable later | yes without restriction |
| Surge protection AC | no |
| Max. short circuit current per MPPT (A) | 23,8 |
| Battery voltage | High Voltage |
| Max. efficiency (%) | 98.00 |
| MPP min. voltage range input (V) | 80.00 |
| Battery cell chemistry | LFP |
| Integrated DC switch | yes |
| MPP max. voltage range input (V) | 800.00 |
| Offgrid usable | no |
| Max. input current DC (A) total | 51.00 |
| Protection degree | IP55 |
| Total number of string inputs | 3 |
| Integrated AC switch | no |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| Max. output current (A) | 11.20 |
| European efficiency (%) | 97.00 |
| Max. short circuit current (A) total | 71.40 |
| Usable capacity (kWh) | 8.28 |
| Shadow management | yes |
| Intrastat country of origin | China |
|---|---|
| Manufacturer item name | HVM+ 8.3*PLENTICORE S G3 |
| Dangerous goods transportation category | 2 |
| Dangerous goods description | LITHIUM ION BATTERIES |
| Manufacturer | BYD + Kostal |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Intrastat product number (HS-code) | 85076000 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
| Dangerous goods Weight (net) (kg) | 123.900 |
| Weight incl. packaging (Kg) | 172.100 |
|---|
| Weight without packaging (kg) | 158.700 |
|---|
Accessoires
Set
0144130
Set
0155128
