BYD HVM+ 19.3 + PLENTICORE M G3
Set
HV system, 8.5-12.5 kW, 19.32 kWh, 3-phase
Art-No.
0162261
Product details
Product information "BYD HVM+ 19.3 + PLENTICORE M G3"
The three PLENTICOINs required to activate the storage function must be ordered separately.
Combination with components from the previous HVS series is not possible.
The new BYD Energy app with the latest firmware (from V1.28.0) is required for commissioning.
The included RJ45 termination connector for the data bus must be pre-assembled on-site. To do this, insert and crimp a wire jumper between pins 1 and 6 (viewed from above on the flat connector side with the pin contact surfaces, cable entry facing down, pins ascending from left to right). An actual resistor is not required.
HVS+/HVM+ and Kostal: approved by the manufacturers on both sides
With the PLENTICORE G3 series, KOSTAL is expanding its flexible portfolio around the PLENTICOIN. This in-house currency for activating device performance and functions is also used here. The inverters are available in three device variants, S, M, and L, with a base output of 4 to 15 kW. PLENTICOINs can be used to activate two higher power classes, storage usage, and the intelligent connection of the EV charger. At any time. The three device versions thus enable almost universal freedom of application with reduced storage requirements. In addition to the proven features and key data, an improved BCU has been used in the new HVM+ series from BYD. This can be used flexibly for the storage modules of the HVB, HVS+, and HVM+. The new automatic SOC balancing optimizer eliminates the need for manual adjustment of the charge level during initial installation and expansion.
Product advantages:
• Activate power and functions as needed using PLENTICOINs
• 17 A input current per MPPT
• Full backup with switchover device
• Automatic SOC balancing during initial installation or expansion
• Faster cable installation thanks to connectors
Product features system:
• AC base power: 8.5 kW
• AC power extension level 10.0 kW
• AC power extension level 12.5 kW
• Feed-in phases: 3
• AC mains voltage: 400 V
• Number of MPPT: 2 + 1 (PV / Bat)
• Max. input voltage DC: 1000 V
• DC connector type: Sunclix
• Communication: WiFi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out
• Protection class: IP65
• Cooling: active
• Dimensions: 561 x 409 x 237 mm (H x W x D)
• Weight: 22.3 kg
Product features storage:
• Battery capacity (usable): 19.32 kWh
• Storage type: High voltage
• Nominal voltage: 358.4 V
• Time window extension: Unlimited
• Number of storage modules in one unit: 3 to 8
• Number of units in parallel: 3
• Cell chemistry: LFP
• COM connections: RJ45
• BAT connections: MC4
• Protection class: IP55
• Dimensions: 1947 x 610 x 282 mm (HxWxD)
• Weight: 304.4 kg
Activations using PLENTICOINs:
Plenticore G3 series:
Increase by one power class (1 level) within the S / M / L device series -> 1 PLENTICOIN
Increase to maximum power (2 levels) within the S / M / L device series -> 1+1 PLENTICOIN
Activation of the storage function -> 3 PLENTICOINS
Activation of the comfort function for the Enector Wallbox -> 2 PLENTICOINS
Scope of delivery:
• 1 x Kostal Plenticore M G3 Hybrid-WR (Item 0155066)
• 1 x BYD B-Box HV+ BCU + Base (Item 0161507)
• 7 x BYD HVM+ battery module (item 0161505)
• 1 x Kostal KSEM G2 Smart Meter (Item 0151118)
Wichtige technische Daten
| Dangerous goods transportation category | 2 |
|---|---|
| Dangerous goods description | LITHIUM ION BATTERIES |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
| Dangerous goods Weight (net) (kg) | 289.100 |
Downloads
-
Battery-Box HVM+ 2,76 kWh0161505
-
SMART ENERGY METER G20151118
-
PLENTICORE G3 – M0155066
-
B-Box HV-BCU + Base0161507
-
SMART ENERGY METER G20151118
-
PLENTICORE G3 – M0155066
Technical details
| Topology | transformerless |
|---|---|
| Decibel | 39 |
| Surge protection DC | no |
| Max. short circuit current per MPPT (A) | 23,8\/23,8\/42 |
| Backup system full | yes with supply |
| Backup system light | no |
| Max. short circuit current (A) total | 89.60 |
| Display | with display |
| Max. input current DC (A) total | 64.00 |
| Arc Fault Circuit Interrupter | no |
| Number of independent MPPT (pcs) | 3 |
| Min. temperature ambient (°C) | -10 |
| Start input voltage (V) | 95 |
| Max. input voltage DC (V) | 1000.00 |
| Usable capacity (kWh) | 19.32 |
| Rapid shutdown | no |
| Capacity extendable later | yes without restriction |
| Surge protection AC | no |
| Max. output current (A) | 20.00 |
| Battery voltage | High Voltage |
| Max. efficiency (%) | 98.00 |
| Max. AC power (kVA) | 8.50 |
| Battery cell chemistry | LFP |
| Integrated DC switch | yes |
| MPP max. voltage range input (V) | 800.00 |
| Offgrid usable | no |
| Protection degree | IP55 |
| Total number of string inputs | 3 |
| Max. generator power DC (kWp) | 12.75 |
| AC nominal power (kW) | 8.50 |
| Contact ripple control receiver | yes |
| Integrated AC switch | no |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| European efficiency (%) | 97.00 |
| MPP min. voltage range input (V) | 170.00 |
| Shadow management | yes |
| Max. input current per MPPT (A). | 17\/17\/30 |
| Intrastat country of origin | China |
|---|---|
| Dangerous goods transportation category | 2 |
| Manufacturer item name | HVM+ 19.3*PLENTICORE M G3 |
| Dangerous goods description | LITHIUM ION BATTERIES |
| Manufacturer | BYD + Kostal |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Intrastat product number (HS-code) | 85076000 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
| Dangerous goods Weight (net) (kg) | 289.100 |
| Weight incl. packaging (Kg) | 350.100 |
|---|
| Weight without packaging (kg) | 326.300 |
|---|
Accessoires
Set
0155128
Set
0144130
