The combination with components from the previous HVS series is not possible.
The included RJ45 termination connector for the data bus requires on-site assembly. This involves inserting and crimping a wire bridge between pins 1 and 6 (viewed from above on the flat side of the connector with the pin contact surfaces, cable entry facing downwards, pins ascending from left to right). No actual resistor is required.
The Symo GEN24 12.0 SC is the latest addition to the Fronius GEN24 family. Like its smaller siblings, the SC is available as a fully-fledged hybrid or battery-ready system. The "Plus" in the SC makes all the difference. You decide whether and when to use this function via an activation code. The smart PV-Point emergency power connection with a maximum output of 3 kW is active in every version and can now be used continuously with a minor upgrade. All other functions and interfaces remain tried and tested. Here, it's combined with the new BYD HVS+ battery storage system. The automatic SOC balancing optimizer eliminates the need for manual adjustments to the charge level during initial installation and expansion. The redesigned BCU connection management with connectors at the power and communication levels saves even more valuable installation time.
The smart PV-Point emergency power connection with a maximum output of 3 kW is active in every version and can now be used continuously with a minor upgrade.
Product advantages:
• Proven and high-performance hybrid system
• Emergency power via Fronius PV-Point, optionally also for continuous use
• Backup power possible with Enwitec transfer switch
• Automatic SOC balancing during initial installation or storage expansion
• Storage capacity can be expanded indefinitely
System product specifications:
• AC power: 12.0 kW
• AC connection: 400V, 3-phase
• Number of MPPTs: 2
• DC input current: MPPT 1 - 28.0 A, MPPT 2 - 14.0 A
• Communication: WLAN, Ethernet, 2 x RS485
• Interfaces: 6 x DI (FRE), 6 x DO
• Protection class: IP66
• Cooling: Active
• Dimensions: 595 x 529 x 180 mm (H x W x D)
• Weight: 22.8 kg
Storage system product specifications:
• Battery capacity (usable): 12.8 kWh
• Storage type: High Voltage
• Nominal Voltage: 512.0 V
• Expansion Timeframe: Unlimited
• Number of storage modules in one unit: 2 to 5 battery modules
• Number of units in parallel: 3
• Cell chemistry: LFP
• COM ports: RJ45
• BAT ports: MC4
• Protection class: IP55
• Dimensions: 1467 x 610 x 282 mm (H x W x D)
• Weight: 207.1 kg
Scope of delivery:
• 1 x Fronius Symo GEN24 12.0 SC Plus Hybrid Inverter (Item 0156755)
Are you a business customer and have a question about one of our products? Send us a message using this inquiry form. We look forward to your message and will get back to you as soon as possible.
The displayed date indicates the next possible shipping date based on our current information. Your sales contact will gladly advise you on alternative products that may be available sooner.