515 Articles
Grid
List
K2 Systems
0162789
Climber 36/50 Solo long-hole
Climber Solo with long hole, silver| Manufacturer item name: | Climber 36/50 Solo long-hole |
|---|
Set
Renusol
0155768
ConSole+ mounting tray incl. XL mounting set
for mounting modules up to 1160 mm width| Manufacturer item name: | Elongation rail XL*ConSole+ tub |
|---|
K2 Systems
0163601
CrossConnector Clip
Security clip for InsertionRail 2.0, silver| Manufacturer item name: | CrossConnector Clip |
|---|
K2 Systems
0157700
D-Dome 6.10 Base Set
Basic rail set for D-Dome 6.10| Colour: | silver |
|---|---|
| Manufacturer item name: | D-Dome 6.10 Base Set |
K2 Systems
0160023
D-Dome 6.10 Base Set LS
Basic rail set for D-Dome 6.10| Manufacturer item name: | D-Dome 6.10 Base Set LS |
|---|
K2 Systems
0157347
D-Dome 6.15 Base Set
Basic rail set for D-Dome 6.15| Colour: | silver |
|---|---|
| Manufacturer item name: | D-Dome 6.15 Base Set |
K2 Systems
0116944
K2 Systems
0113188
Distance plate for roof hooks
Regulator disk, g-shape, 2 mm| Colour: | silver |
|---|---|
| Manufacturer item name: | Regulator disks (G-shape) |
K2 Systems
0152076
Dome 6 Connector 495 Set
Rail connector set for Dome 6, length 495 mm| Colour: | silver |
|---|---|
| Manufacturer item name: | Dome 6 Connector 495 Set |
K2 Systems
0133174
Dome 6 Porter long
For accommodating different ballast slabs| Colour: | silver |
|---|---|
| Manufacturer item name: | Dome Porter long |
K2 Systems
0133173
Dome 6 Porter short
For accommodating different ballast slabs| Colour: | silver |
|---|---|
| Manufacturer item name: | Dome Porter short |
K2 Systems
0164902
Dome 6 XPress Connector Set
Rail connector set for Dome 6 XPress| Colour: | silver |
|---|---|
| Manufacturer item name: | Dome 6 XPress Connector Set |
K2 Systems
0164907
Dome 6.07 Peak
Upper module support for Dome 6.07| Colour: | silver |
|---|---|
| Manufacturer item name: | Dome 6.07 Peak |
K2 Systems
0164906
K2 Systems
0148007
Dome 6.10 Peak - new
For module elevation of the Dome 6.10 system| Colour: | silver |
|---|---|
| Manufacturer item name: | Dome 6.10 Peak |
K2 Systems
0160022
Dome 6.10 Peak LS
For module elevation of the Dome 6.10 Base Set LS| Manufacturer item name: | Dome 6.10 Peak LS |
|---|
K2 Systems
0148008
Dome 6.10 SD
Front module support element for Dome 6.10 system| Colour: | silver |
|---|---|
| Manufacturer item name: | Dome 6.10 SD |
K2 Systems
0152331
Dome 6.15 Peak
For elevation of the Dome 6.15 System| Colour: | silver |
|---|---|
| Manufacturer item name: | Dome 6.15 Peak |
PV Mounting Systems
In the Krannich Solar webshop, installers will find an extensive range of components for building stable and durable substructures for photovoltaic systems. We offer mounting solutions from renowned manufacturers such as K2 Systems, Renusol, Conduct, Marzari, and Otto Lehmann.
Flat Roof Systems
- D-Dome 6: East-west orientation, prevents shading, available as Xpress (pre-assembled) or Classic.
- S-Dome 6: South-facing orientation, ideal for one-sided sunlight, also in Xpress or Classic.
- Dome Zero: Roof-parallel, ideal for up to 10° pitched roofs with parapets.
- TiltUp Vento: Quick assembly, fixed tilt (20°, 25°, 30°). GreenRoof Vento designed for green roofs.
- Triangle / MultiAngle: Flexible tilt 10–45°, cost-effective alternative.
Pitched Roof Systems
- SolidRail: Covers almost all roof types, except bitumen.
- SingleRail: With Splice Foot, suitable for bitumen roofs.
- K2 Inlay System: Creates seamless module surface, aesthetic and quick to install.
Special Solutions for Metal & Trapezoidal Roofs
- BasicRail: For trapezoidal & sandwich roofs, high load, thermally decoupled, building-approved.
- MiniRail: Short rails, minimal materials, optional tilt with MiniFive.
- MultiRail: Rail + roof attachment in one, also base for Dome 6. CSM version for corrugated sheet roofs.
Facade Systems
- WallPV FacadeRail: For brickwork, concrete, ETICS (e.g. polystyrene), and ventilated façades.
- WallPV PerfoRail: Direct rail mounting on insulated masonry, without piercing insulation.
- WallPC CarrierRail: For sandwich panels, mounted with approved thin-sheet screws.
- WallPV MultiRail: For trapezoidal & corrugated façades, especially agricultural use.
Ground-Mounted Systems & Carports
- P-Rack: For small ground systems, pre-configured (14–16 modules), no planning needed.
- N-Rack: For medium ground systems, configurable with concrete or pile-driving foundations. Requires custom planning.
Roof Panels
From Marzari and Otto Lehmann: Color-matched metal roof panels with pre-mounted hooks, foam wedges, or pre-drilled holes. Easy integration without cutting/drilling existing roofing sheets.
Accessories for Mounting Systems
- Fall protection (e.g. for Dome 6)
- Cable management (wire trays, K2/Conduct organizers)
- Lightning protection & equipotential bonding
- Friction coefficient measurement kits
- Mounting trays and rail extensions from Renusol
- ...and more
Planning PV Substructures with K2 Base
The digital tool K2 Base simplifies PV mounting design. Using Google Maps, installers can define roof areas and place modules. It calculates loads (wind, snow), generates mounting plans and itemized lists, and considers thermal & maintenance separations.
Project data can be transferred directly into the Krannich Solar webshop with a free MyK2 account.