B-Box HVM+ 16.6 + Verto plus 15.0 SPD I+II
HV storage system, 16.56 kWh, 15.0 kW, 3-phase
Art-No.
0165389
Product details
Product information "B-Box HVM+ 16.6 + Verto plus 15.0 SPD I+II"
The included RJ45 termination connector for the data bus requires on-site assembly. This involves inserting and crimping a wire bridge between pins 1 and 6 (viewed from above on the flat side of the connector with the pin contact surfaces, cable entry facing downwards, pins ascending from left to right). No actual resistor is required.
Just as with the Fronius GEN24 units, the "plus" makes the difference in the new Verto series. Verto Plus hybrid inverters come factory-equipped with a high-performance high-voltage battery connection. With power ratings ranging from 15 to 33 kW, they are ideal system components for the small commercial sector. Their comprehensive communication features are complemented by AC and DC surge protection and Fronius Arc Guard Technology. High safety standards also extend to data security, with servers located in Europe. In this instance, the system is paired with the BYD HVM+ battery. The automatic SOC balancing optimizer eliminates the need for manual state-of-charge adjustments during initial installation or system expansion. Additionally, the redesigned BCU connection management—featuring plug-in connectors for both power and communication—saves valuable installation time. Product advantages:
• Proven, high-performance hybrid system
• Emergency power via Fronius PV Point
• 3-phase backup power possible with Fronius Backup Switch + Controller
• Automatic SOC balancing during initial installation or storage expansion
• Storage capacity expandable indefinitely
System product specifications:
• AC nominal power: 15.0 kW
• Grid connection: 3-phase
• AC grid voltage: 400 V
• Number of MPPTs: 3
• Max. DC input voltage: 1000 V
• Max. DC input current: 28 A per MPPT
• DC surge protection: Type 1+2
• AC surge protection: Type 2
• DC connector type: PV – Stäubli MC4, Bat – Stäubli MC4 Evo Stor
• Number of battery connections: 1
• Communication: WLAN, Ethernet
• Interfaces: 2 x RS485, 6 x DI (ripple control receiver), 6 x DO
• Protection class: IP66
• Cooling: Active
• Weight: 43.0 kg
• Dimensions: 865 x 574 x 279 mm (H x W x D)
• Warranty: 2 years + an additional 3 years upon free registration
Storage product specifications:
• Battery capacity (usable): 16.56 kWh
• Storage type: High-voltage
• Nominal voltage: 307.2 V
• Expansion timeframe: Unlimited
• Number of storage modules per unit: 4 to 8
• Number of units in parallel: 3
• Cell chemistry: LFP
• COM connections: RJ45
• BAT connections: MC4
• Protection class: IP55
• Dimensions: 1707 x 610 x 282 mm (H x W x D)
• Weight: 263.0 kg kg
Scope of delivery:
• 1 x Fronius Verto Plus 15.0 hybrid inverter (Item 0159332)
• 1 x Fronius Smart Meter TS 65A-3 (Item 0151650)
• 1 x BYD B-Box HV BCU + Base (Item 0161507)
• 6 x BYD HVM+ battery module (Item 0161505)
Downloads
-
Battery-Box HVM+ 2,76 kWh0161505
-
Verto Plus 15.00159332
-
Fronius Smart Meter TS 65A-30151650
-
B-Box HV-BCU + Base0161507
-
Battery-Box HVM+ 2,76 kWh0161505
-
Verto Plus 15.00159332
-
Fronius Smart Meter TS 65A-30151650
Technical details
| AC nominal power (kW) | 15.00 |
|---|---|
| Surge protection AC | type 2 |
| Contact ripple control receiver | yes |
| Number of independent MPPT (pcs) | 3 |
| Arc Fault Circuit Interrupter | yes |
| DC connection | spring-type terminal |
| Surge protection DC | type 1 and type 2 |
| Decibel | 50 |
| Display | w/o display |
| Backup system light | yes with supply |
| Backup system full | yes with supply |
| European efficiency (%) | 97.35 |
| Protection degree | IP55 |
| Total number of string inputs | 6 |
| Commercial system | no |
| Integrated AC switch | no |
| Integrated DC switch | yes |
| Capacity extendable later | yes without restriction |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| Max. AC power (kVA) | 15.00 |
| Max. output current (A) | 21.70 |
| Max. generator power DC (kWp) | 22.50 |
| Max. input voltage DC (V) | 1000.00 |
| Max. input current DC (A) total | 84.00 |
| Max. input current per MPPT (A). | 28 |
| Max. discharging power (kW) | 6.75 |
| Max. short circuit current (A) total | 150.00 |
| Max. short circuit current per MPPT (A) | 50 |
| MPP max. voltage range input (V) | 870.00 |
| Max. nominal charging power (kW) | 6.75 |
| Max. efficiency (%) | 98.03 |
| MPP min. voltage range input (V) | 180.00 |
| Min. temperature ambient (°C) | -10 |
| Grid protection | yes |
| Offgrid usable | no |
| Usable capacity (kWh) | 16.56 |
| Start input voltage (V) | 150 |
| Topology | transformerless |
| Battery cell chemistry | LFP |
| Dangerous goods description | LITHIUM ION BATTERIES |
|---|---|
| Dangerous goods Weight (net) (kg) | 247.800 |
| Dangerous goods class | 9 |
| Dangerous goods transportation category | 2 |
| UN No. | 3480 |
| Dangerous goods packaging type | 4G |
| Manufacturer | BYD + Fronius |
| Manufacturer item name | HVM+ 16.56*Verto plus 15.0 SPD I+II*Smart Meter |
| Intrastat product number (HS-code) | 85076000 |
| Classification code | M4 |
| Tunnel restriction code | (E) |
| Weight incl. packaging (Kg) | 289.050 |
|---|
| Weight without packaging (kg) | 264.840 |
|---|
