504 Articles
Grid
List
K2 Systems
0154828
RK2 SolidRail Medium
Mounting rail, length 4.80 m| Colour: | silver |
|---|---|
| Manufacturer item name: | SolidRail Medium; 4.80 m |
K2 Systems
0133156
RK2 SolidRail UltraLight
Mounting rail, length 4.40 m| Colour: | silver |
|---|---|
| Manufacturer item name: | SolidRail UltraLight; 4.40 m |
K2 Systems
0157652
RK2 SolidRail UltraLight
Mounting rail, length 2.40 m| Colour: | silver |
|---|---|
| Manufacturer item name: | SolidRail UltraLight; 2.40 m |
K2 Systems
0115377
R-Medi Set
Roof fastener for mounting on round seam profiles| Colour: | silver |
|---|---|
| Manufacturer item name: | Single Round SeamClamp CF:x |
K2 Systems
0116925
Roof hook Coppo
Roof hook for Coppo tiles, 1-way height-adjustable| Colour: | silver |
|---|---|
| Manufacturer item name: | SolidHook VAR1 COP H18/\u2264153 30x5 |
K2 Systems
0115600
Roof hook for plain tiles (Alpin) RF PA H47/120 HD
Alpin Roof Hook for Pan Tiles h=47mm,stainl. steel| Colour: | silver |
|---|---|
| Manufacturer item name: | SolidHook PAN H47/121 40x8 |
K2 Systems
0125755
Roof hook height compensator
Height compensator, 4mm base plate| Colour: | silver |
|---|---|
| Manufacturer item name: | Height Compensator 4 mm |
Conduct
0159772
RoofSupport ceiling support CLICK bracket 100 mm
Mounting bracket mesh cable tray, galvanized steel| Manufacturer item name: | Ceiling support CLICK console 100 HD |
|---|
Conduct
0159773
RoofSupport ceiling support CLICK bracket 200 mm
Mounting bracket mesh cable tray, galvanized steel| Manufacturer item name: | Ceiling support CLICK console 200 HD |
|---|
Conduct
0159774
RoofSupport ceiling support CLICK bracket 300 mm
Mounting bracket mesh cable tray, galvanized steel| Manufacturer item name: | Ceiling support CLICK console 300 HD |
|---|
Conduct
0157039
RoofSupport connector for mesh cable trays
Reinforced clutch, V2A| Manufacturer item name: | Reinforced coupling RVS304 |
|---|
PV Mounting Systems
In the Krannich Solar webshop, installers will find an extensive range of components for building stable and durable substructures for photovoltaic systems. We offer mounting solutions from renowned manufacturers such as K2 Systems, Renusol, Conduct, Marzari, and Otto Lehmann.
Flat Roof Systems
- D-Dome 6: East-west orientation, prevents shading, available as Xpress (pre-assembled) or Classic.
- S-Dome 6: South-facing orientation, ideal for one-sided sunlight, also in Xpress or Classic.
- Dome Zero: Roof-parallel, ideal for up to 10° pitched roofs with parapets.
- TiltUp Vento: Quick assembly, fixed tilt (20°, 25°, 30°). GreenRoof Vento designed for green roofs.
- Triangle / MultiAngle: Flexible tilt 10–45°, cost-effective alternative.
Pitched Roof Systems
- SolidRail: Covers almost all roof types, except bitumen.
- SingleRail: With Splice Foot, suitable for bitumen roofs.
- K2 Inlay System: Creates seamless module surface, aesthetic and quick to install.
Special Solutions for Metal & Trapezoidal Roofs
- BasicRail: For trapezoidal & sandwich roofs, high load, thermally decoupled, building-approved.
- MiniRail: Short rails, minimal materials, optional tilt with MiniFive.
- MultiRail: Rail + roof attachment in one, also base for Dome 6. CSM version for corrugated sheet roofs.
Facade Systems
- WallPV FacadeRail: For brickwork, concrete, ETICS (e.g. polystyrene), and ventilated façades.
- WallPV PerfoRail: Direct rail mounting on insulated masonry, without piercing insulation.
- WallPC CarrierRail: For sandwich panels, mounted with approved thin-sheet screws.
- WallPV MultiRail: For trapezoidal & corrugated façades, especially agricultural use.
Ground-Mounted Systems & Carports
- P-Rack: For small ground systems, pre-configured (14–16 modules), no planning needed.
- N-Rack: For medium ground systems, configurable with concrete or pile-driving foundations. Requires custom planning.
Roof Panels
From Marzari and Otto Lehmann: Color-matched metal roof panels with pre-mounted hooks, foam wedges, or pre-drilled holes. Easy integration without cutting/drilling existing roofing sheets.
Accessories for Mounting Systems
- Fall protection (e.g. for Dome 6)
- Cable management (wire trays, K2/Conduct organizers)
- Lightning protection & equipotential bonding
- Friction coefficient measurement kits
- Mounting trays and rail extensions from Renusol
- ...and more
Planning PV Substructures with K2 Base
The digital tool K2 Base simplifies PV mounting design. Using Google Maps, installers can define roof areas and place modules. It calculates loads (wind, snow), generates mounting plans and itemized lists, and considers thermal & maintenance separations.
Project data can be transferred directly into the Krannich Solar webshop with a free MyK2 account.