HELIVOR HV 16.0+ PLENTICORE L G3
HV system, 15.0–20 kW, 16.0 kWh, 3-phase
Art-No.
0162697
Product details
Product information "HELIVOR HV 16.0+ PLENTICORE L G3"
The 3 PLENTICOINs required to activate the memory function must be ordered separately.
With the PLENTICORE G3 series, KOSTAL is expanding its flexible portfolio around the PLENTICOIN. This in-house currency for activating device performance and functions is also used here. The inverters are available in three device variants, S, M and L, with a base output of 4 to 15 kW. PLENTICOINs can be used to activate two higher power classes, storage utilisation and the intelligent connection of the EV charger. At any time. The three device versions thus enable almost universal freedom of application with reduced storage requirements. Installation of the new HELIVOR high-voltage storage system is more than smooth thanks to its screwless and wireless stack design. With only minimal space requirements, up to 9 storage modules with 28.8 kWh of usable capacity can be implemented per unit. The maximum is 8 towers connected in parallel with a total of 230.4 kWh. The field of application thus ranges from residential to small commercial systems.
Product advantages:
• Activate power and functions as needed using PLENTICOINs
• 17(S+M) / 30(L) A input current per MPPT
• Full backup with switchover device
• Screwless and wireless stacking design
• Total capacity of up to 230.4 kWh possible
Product features System:
• AC base power: 15.0 kW
• AC power extension stage 1: 17.5 kW
• AC power extension stage 1: 20.0 kW
• Feed-in phases: 3
• AC mains voltage: 400 V
• Number of MPPT: 2 + 1 (PV / Bat)
• Max. input voltage DC: 1000 V
• DC connector type: Sunclix
• Communication: WiFi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out
• Protection class: IP65
• Cooling: active
• Dimensions: 561 x 409 x 237 mm (H x W x D)
• Weight: 24.3 kg
Product features Storage:
• Usable battery capacity: 16.0 kWh
• Storage type: high voltage
• Nominal voltage: 320 V
• Time window extension: unlimited
• Number of storage modules in one unit: 2 – 9 storage modules
• Number of units in parallel: up to 8 towers
• Cell chemistry: LFP
• Communication: CAN 2.0A, RS485, Ethernet, WiFi
• Cooling: passive
• Protection class: IP65
• Dimensions: 1240 x 450 x 296 mm (HxWxD)
• Weight: BMS + base: 30.0 kg, 5 x storage units, 36.0 kg each
Activations using PLENTICOINs:
Plenticore G3 series:
Increase by one power class (1 level) within the S / M / L device series 1 PLENTICOIN
Increase to maximum power (2 levels) within the S / M / L device series 1+1 PLENTICOIN
Activation of the battery function 3 PLENTICOINS
Activation of the comfort function for the Enector Wallbox 2 PLENTICOINS
Scope of delivery:
• 1 x Kostal Plenticore L G3 Hybrid-WR (item 0155067)
• 1 x Kostal HELIVOR HV Battery Management System (item 0162408)
• 5 x Kostal HELIVOR HV 3.2 storage module (item 0162409)
• 1 x Kostal KSEM G2 smart meter (item 0151118)
Downloads
-
SMART ENERGY METER G20151118
-
HELIVOR HV BMS0162408
-
PLENTICORE G3 – L0155067
-
HELIVOR HV-3.20162409
-
SMART ENERGY METER G20151118
-
HELIVOR HV BMS0162408
-
PLENTICORE G3 – L0155067
-
HELIVOR HV-3.20162409
Technical details
| AC nominal power (kW) | 15.00 |
|---|---|
| Surge protection AC | no |
| Contact ripple control receiver | yes |
| Number of independent MPPT (pcs) | 3 |
| Arc Fault Circuit Interrupter | no |
| DC connection | SUNCLIX |
| Surge protection DC | no |
| Decibel | 39 |
| Display | with display |
| Backup system light | yes with supply |
| Backup system full | yes with supply |
| European efficiency (%) | 97.00 |
| Protection degree | IP65 |
| Total number of string inputs | 3 |
| Commercial system | no |
| Integrated AC switch | no |
| Integrated DC switch | yes |
| Capacity extendable later | yes without restriction |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| Max. AC power (kVA) | 15.00 |
| Max. output current (A) | 21.70 |
| Max. generator power DC (kWp) | 22.50 |
| Max. input voltage DC (V) | 1000.00 |
| Max. input current DC (A) total | 90.00 |
| Max. input current per MPPT (A). | 30 |
| Max. discharging power (kW) | 9.60 |
| Max. short circuit current (A) total | 126.00 |
| Max. short circuit current per MPPT (A) | 42 |
| MPP max. voltage range input (V) | 800.00 |
| Max. nominal charging power (kW) | 9.60 |
| Max. efficiency (%) | 98.00 |
| MPP min. voltage range input (V) | 170.00 |
| Min. temperature ambient (°C) | -10 |
| Offgrid usable | no |
| Usable capacity (kWh) | 16.00 |
| Shadow management | yes |
| Rapid shutdown | no |
| Start input voltage (V) | 95 |
| Topology | transformerless |
| Battery cell chemistry | LFP |
| Dangerous goods description | LITHIUM ION BATTERIES |
|---|---|
| Dangerous goods Weight (net) (kg) | 110.000 |
| Dangerous goods class | 9 |
| Dangerous goods transportation category | 2 |
| UN No. | 3480 |
| Dangerous goods packaging type | 4G |
| Manufacturer | Kostal |
| Manufacturer item name | HELIVOR HV 16*PLENTICORE L G3 |
| Intrastat country of origin | Germany |
| Intrastat product number (HS-code) | 85076000 |
| Classification code | M4 |
| Tunnel restriction code | (E) |
| Weight incl. packaging (Kg) | 237.800 |
|---|
| Weight without packaging (kg) | 226.400 |
|---|
