BYD HVM+ 8.3 + PLENTICORE PLUS 8.5 G2
Set
HV storage system, 8.28 kWh usable, 3-phase
Art-No.
0162268
Product details
Product information "BYD HVM+ 8.3 + PLENTICORE PLUS 8.5 G2"
The PLENTICOINs required to enable power and functions must be ordered separately.
Combination with components from the previous HVS series is not possible.
The new BYD Energy app with the latest firmware (from V1.28.0) is required for commissioning.
The RJ45 terminating connector for the data bus included in the scope of delivery must be pre-assembled on site. To do this, a wire jumper must be inserted and crimped between pins 1 and 6 (view from above onto the flat connector side with the pin contact surfaces, cable entry facing down, pins ascending from left to right). An actual resistor is not required.
HVS+/HVM+ and Kostal: approved by the manufacturers on both sides
A true veteran of the storage package sector: Kostal Plenticore Plus G2 and BYD HVM. The latest generation of HVM high-voltage storage systems from BYD now has a "plus" added. In addition to the proven features and key specifications, the new HVM+ features an improved BCU. This can be used flexibly for the storage modules of the HVB, HVS+, and HVM+ series. The new automatic SOC balancing optimizer eliminates the need to manually adjust the charge level during initial installation and expansion. The revised BCU connection management with connectors at the power and communication levels saves even more valuable time during installation. It's no coincidence that this is one of our top combinations in our broad portfolio of storage packages.
Product advantages:
• Proven and powerful storage package
• Automatic SOC balancing during initial installation or expansion
• Faster cable installation thanks to connectors
• Storage can be expanded indefinitely
System product features:
• AC nominal power: 8.5 kW
• Feed-in phases: 3
• AC grid voltage: 400 V
• Number of MPPTs: 2 + 1 (PV / Bat)
• Max. DC input voltage: 1000 V
• DC connector type: Sunclix
• Communication: Wi-Fi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out
• Protection class: IP65
• Cooling: active
• Dimensions: 563 x 405 x 233 mm (H x W x D)
• Weight: up to 21.6 kg
Storage product features:
• Battery capacity (usable): 8.28 kWh
• Storage type: High-voltage
• Nominal voltage: 153.6 V
• Expansion time frame: unlimited
• Number of memory modules in one unit: 3 to 8
• Number of units in parallel: 3
• Cell chemistry: LFP
• COM ports: RJ45
• BAT ports: MC4
• Protection class: IP55
• Dimensions: 987 x 610 x 282 mm (HxWxD)
• Weight: 138.8 kg
Activations using PLENTICOINs:
General (all G1/G2 Plenticore plus series, MP plus series, Enector Wallbox):
Activation of the storage function: 1 PLENTICOIN
Activation of the Wallbox Smart Features: 2 PLENTICOINS
Scope of delivery:
• 1 x Kostal Plenticore Plus 8.5 G2 hybrid inverter (item 0152314)
• 1 x BYD B-Box HV+ BCU + Base (item 0161507)
• 3 x BYD HVM+ storage modules (item 0161505)
• 1 x Kostal KSEM G2 smart meter (item 0151118)
Wichtige technische Daten
| Dangerous goods transportation category | 2 |
|---|---|
| Dangerous goods description | LITHIUM ION BATTERIES |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
| Dangerous goods Weight (net) (kg) | 123.900 |
Downloads
-
Battery-Box HVM+ 2.76 kWh0161505
-
SMART ENERGY METER G20151118
-
Plenticore Plus 8.5 G2 Hybrid IV0152314
-
B-Box BCU + Base (HVB/HVS+/HVM+)0161507
-
SMART ENERGY METER G20151118
-
Plenticore Plus 8.5 G2 Hybrid IV0152314
Technical details
| Topology | transformerless |
|---|---|
| Decibel | 39 |
| Surge protection DC | no |
| Max. efficiency (%) | 97.20 |
| Backup system light | no |
| Display | with display |
| Start input voltage (V) | 150 |
| Backup system full | no |
| Arc Fault Circuit Interrupter | no |
| Number of independent MPPT (pcs) | 3 |
| Min. temperature ambient (°C) | -10 |
| European efficiency (%) | 96.50 |
| Max. input voltage DC (V) | 1000.00 |
| Max. input current per MPPT (A). | 13 |
| Rapid shutdown | no |
| Capacity extendable later | yes without restriction |
| Max. short circuit current (A) total | 48.75 |
| Surge protection AC | no |
| Max. input current DC (A) total | 39.00 |
| Battery voltage | High Voltage |
| Max. AC power (kVA) | 8.50 |
| Battery cell chemistry | LFP |
| Max. output current (A) | 13.63 |
| MPP max. voltage range input (V) | 720.00 |
| Integrated DC switch | yes |
| Offgrid usable | no |
| Protection degree | IP55 |
| Total number of string inputs | 3 |
| Max. generator power DC (kWp) | 12.75 |
| AC nominal power (kW) | 8.50 |
| Contact ripple control receiver | yes |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| Usable capacity (kWh) | 8.28 |
| Shadow management | yes |
| MPP min. voltage range input (V) | 345.00 |
| Max. short circuit current per MPPT (A) | 16,25 |
| Manufacturer item name | HVM+ 8.3*PLENTICORE PLUS 8.5 G2 |
|---|---|
| Intrastat country of origin | China |
| Dangerous goods transportation category | 2 |
| Dangerous goods description | LITHIUM ION BATTERIES |
| Manufacturer | BYD + Kostal |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Intrastat product number (HS-code) | 85076000 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
| Dangerous goods Weight (net) (kg) | 123.900 |
| Weight incl. packaging (Kg) | 170.360 |
|---|
| Weight without packaging (kg) | 156.960 |
|---|
Accessoires
Set
0144130
