B-Box HVS 10.2 + Plenticore L G3
Set
HV system, 15.0-20.0 kW, 10.24 kWh, BCU 2.0, 3-ph
Art-No.
0161415
Product details
Product information "B-Box HVS 10.2 + Plenticore L G3"
The 3 PLENTICOINs required to activate the storage function must be ordered separately.
The RJ45 termination plug for the data bus included in the scope of delivery must be finished on site. To do this, insert a wire bridge between pins 1 + 6 (viewed from above on the flat side of the plug with the pin contact surfaces, cable entry at the bottom, pins ascending from left to right) and crimp it. No actual resistor is required.
With the new PLENTICORE G3 series, KOSTAL is expanding its flexible portfolio around the PLENTICOIN. This in-house currency for activating device performance and functions is also used here. The inverters are available in three device variants, S, M, and L, with a base output of 4 to 15 kW. PLENTICOINs can be used to activate two higher performance classes, storage usage, and the intelligent connection of the EV charger. At any time. The 3 new device versions thus enable almost universal freedom of application with reduced storage requirements. Here in an attractive power bundle with the proven HVS series from BYD. Proven, reliable and can be extended indefinitely. Now with even faster installation thanks to the new BCU 2.0.
Product advantages:
• Activate power and functions as needed using PLENTICOINs
• 17 A input current per MPPT
• Full backup with switchover device
• Storage expandable indefinitely
• Certified battery safety in accordance with VDE 2510-50
Product features System:
• AC base power: 15.0 kW
• AC power extension level 1: 17.5 kW
• AC power extension level 2: 20.0 kW
• Number of MPPT: 2 + 1 (PV / Bat)
• AC connection: 3-phase
• Communication: WiFi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out
• Protection class: IP65
• Cooling: active
• Dimensions: 561 x 409 x 237 mm (H x W x D)
• Weight: 24.1 kg
Product features Storage:
• Battery capacity (usable): 10.24 kWh
• Time window extension: unlimited
• Cell chemistry: LFP
• Nominal voltage: 409.6 V
• Protection class: IP55
• Dimensions: 1228 x 585 x 298 mm (H x W x D)
• Weight: BMS 15.0 kg, 4 x storage units 38.0 kg each
Activations using PLENTICOINs:
Increase by one performance class (1 level) within the S / M / L device series -> 1 PLENTICOIN
Increase to maximum performance (2 levels) within the S / M / L device series -> 1+1 PLENTICOIN
Activation of the storage function -> 3 PLENTICOINs
Activation of the convenience function for the Enector Wallbox -> 2 PLENTICOINs
Scope of delivery:
• 1 x Kostal Plenticore L G3 hybrid inverter (item 0155067)
• 1 x BYD B-Box Premium HV BCU + Base 2.0 ((item 0159471)
• 4 x BYD HVS storage module (item 0131385)
• 1 x Kostal KSEM G2 Smart Meter (item 0151118)
Wichtige technische Daten
| Dangerous goods transportation category | 2 |
|---|---|
| Dangerous goods description | LITHIUM ION BATTERIES |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
| Dangerous goods Weight (net) (kg) | 154.800 |
Downloads
-
SMART ENERGY METER G20151118
-
B-Box Premium HV BCU + Base 2.00159471
-
Battery-Box Premium HVS 2,56 kWh0131385
-
PLENTICORE G3 – L0155067
-
SMART ENERGY METER G20151118
-
B-Box Premium HV BCU + Base 2.00159471
-
Battery-Box Premium HVS 2,56 kWh0131385
-
PLENTICORE G3 – L0155067
Technical details
| Topology | transformerless |
|---|---|
| Decibel | 39 |
| Surge protection DC | no |
| Backup system full | yes with supply |
| Backup system light | no |
| Display | with display |
| Arc Fault Circuit Interrupter | no |
| Number of independent MPPT (pcs) | 3 |
| Start input voltage (V) | 95 |
| Max. short circuit current per MPPT (A) | 42 |
| Usable capacity (kWh) | 10.24 |
| Max. input voltage DC (V) | 1000.00 |
| Commercial system | no |
| Max. output current (A) | 32.00 |
| Rapid shutdown | no |
| Max. AC power (kVA) | 15.00 |
| Surge protection AC | no |
| Max. short circuit current (A) total | 126.00 |
| Max. efficiency (%) | 98.00 |
| Battery cell chemistry | LFP |
| Integrated DC switch | yes |
| Max. input current per MPPT (A). | 30 |
| Max. generator power DC (kWp) | 22.50 |
| MPP max. voltage range input (V) | 800.00 |
| Offgrid usable | no |
| Total number of string inputs | 3 |
| AC nominal power (kW) | 15.00 |
| Contact ripple control receiver | yes |
| Integrated AC switch | no |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| European efficiency (%) | 97.00 |
| Max. input current DC (A) total | 90.00 |
| MPP min. voltage range input (V) | 170.00 |
| Shadow management | yes |
| DC connector type | SUNCLIX |
| Intrastat country of origin | China |
|---|---|
| Dangerous goods transportation category | 2 |
| Manufacturer item name | HVS 10.2*BCU2.0*Base*PLENTICORE L G3*KOSTAL Smart Energy Meter - G2 |
| Dangerous goods description | LITHIUM ION BATTERIES |
| Manufacturer | BYD + Kostal |
| Tunnel restriction code | (E) |
| Classification code | M4 |
| Intrastat product number (HS-code) | 85076000 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
| Dangerous goods Weight (net) (kg) | 154.800 |
| Weight incl. packaging (Kg) | 200.140 |
|---|
| Weight without packaging (kg) | 194.160 |
|---|
Accessoires
Set
0144130
Set
0156560
Set
0155128
