The Smart Meter included in the set does not have an interface for using dynamic electricity tariffs. If this function is required, please use the Fronius Smart Meter IP (article 0154145).
For the additionally required power cable (4 to 6mm²) a standard DB PV1-F solar cable (for example KBE) can be used.
A Cat6 communication cable is also required.
The product cannot be used in Finland, Denmark and Ireland.
The RJ45 termination plug for the data bus included in the scope of delivery must be finished on site. To do this, insert a wire bridge between pins 1 + 6 (viewed from above on the flat side of the plug with the pin contact surfaces, cable entry at the bottom, pins ascending from left to right) and crimp it. No actual resistor is required.
Note:
If necessary, you can remove individual components of the set from your order in the shopping basket and replace them with comparable products if required.
B-Box HVS 10.2:
- usable capacity: 10.24 kWh
- nominal voltage: 409 V
- Max. Output current: 25 A
- Operating Voltage Range: 320-460 V
- ambient temperature: -10 °C to +50 °C
- interfaces: CAN/RS485
- round trip energy efficiency: >= 96 %
- certification: VDE2510-50 / IEC62619/ CEC / CE / UN38.3
- IP protection class: IP55
- Extend anytime / up to 3 identical systems parallel / 38.4 kWh usable
Are you a business customer and have a question about one of our products? Send us a message using this inquiry form. We look forward to your message and will get back to you as soon as possible.
The displayed date indicates the next possible shipping date based on our current information. Your sales contact will gladly advise you on alternative products that may be available sooner.