B-Box HVM 19.3 + blueplanet hybrid 12.0 NH3-M3

BYD + Kaco

Art-Nr. 0159974

B-Box HVM 19.3 + blueplanet hybrid 12.0 NH3-M3

HV storage system,19.32 kWh usable, BCU 2.0, 3-ph

BYD

Art.-Nr. 0131400

Battery-Box Premium HVM 2,76 kWh

HV storage module, 2.76 kWh usable

blueplanet hybrid 12.0 NH3-M3 | Hybrid inverter, 3-phase

KACO new energy

Art.-Nr. 0154929

blueplanet hybrid 12.0 NH3-M3

Hybrid inverter, 3-phase

BYD

Art.-Nr. 0159471

B-Box Premium HV BCU + Base 2.0

Controller for HV storage series HVM + HVS

Product information

CAUTION:
UN 3480 Lithium ion batteries / Transport hazard class 9 / (E) Packing Group II

The RJ45 termination plug for the data bus included in the scope of delivery must be finished on site. To do this, insert a wire bridge between pins 1 + 6 (viewed from above on the flat side of the plug with the pin contact surfaces, cable entry at the bottom, pins ascending from left to right) and crimp it. No actual resistor is required.

The NH3-M3 hybrid inverter series from Kaco is available in 3 power classes from 8 to 12 kW. As up to 3 systems can be operated in parallel, small commercial systems can also be realised in addition to home applications. The 3 independent MPP trackers and the integrated backup connection with a switchover time <10ms create flexible application options. Type 2 overvoltage protection on the DC side and a complete range of communication interfaces leave nothing to be desired. It can even be used purely as a storage and off-grid system. In combination with the high-voltage power of the HVM / HVS storage systems from BYD, anything is possible here.

Product advantages:

- 3 MPP trackers with 16A input current each

- Backup connection with <10ms switching time

- Backup and stand-alone operation without additional activation

- Storage in the proven stacking concept

- Can be expanded indefinitely

Product features System:

- AC power: 12.0 kW

- Number of MPPT: 3

- AC connection: 400V, 3-phase

- Communication: Wifi, LAN, RS485, CAN

- Interfaces: 2 x DO, 4 x DI (FRE via Kaco Powador protect)

- Protection class: IP66

- Cooling: passive

- Weight: 28.5 kg

- Dimensions: 545 x 530 x 230 mm (W x H x D)

- Included in the scope of delivery: Energy Meter SDM630 + 3 x measuring transformer

Product features Memory:

- Battery capacity (usable): 22.08 kWh

- Nominal voltage: 409.6 V

- Extension time window: unlimited

- Structure per unit: 3 to 8 battery modules

- Number of units in parallel: 3

- Cell chemistry: LFP

- COM connections: RJ45

- BAT connections: MC4

- Protection class: IP55

- Dimensions: 2160 x 585 x 298 mm (HxWxD)

- Weight: 319.0 kg

Conclusion:

This combination has the best prerequisites for flexible and reliable applications.

Scope of delivery:

- 1 x Kaco blueplanet hybrid 12.0 incl. CTs (article 0154929)

- 1 x BYD HV BCU2.0 + base (article 0159471)

- 7 x BYD HVM storage module (article 0131400)

view more Show less

Technical details

Topology:	transformerless
Feed-in phases:	3
AC nominal power (kW):	12,00
Max. input voltage DC (V):	1.100,00
Max. generator power DC (kWp):	18,00
Arc Fault Circuit Interrupter:	no
Battery voltage:	High Voltage
Usable capacity (kWh):	19,32
Number of independent MPPT (pcs):	3
Display:	w/o display
Interfaces:	Dig. in, Dig. out, Ethernet, RS485, W-Lan
Max. AC power (kVA):	12,00
Inverter type:	hybrid inverter, string inverter
Commercial system:	no
Integrated DC switch:	yes
Offgrid usable:	yes
Integrated AC switch:	no
Max. temperature ambient (°C):	50
Backup system light:	yes
Backup system full:	yes with supply
Start input voltage (V):	200
Contact ripple control receiver:	yes
MPP min. voltage range input (V):	200,00
MPP max. voltage range input (V):	950,00
Capacity extendable later:	yes without restriction
Emergency power (separate port):	1
Max. short circuit current (A) total:	72,00
Max. output current (A):	19,20
Contact for self-consumption optimization (e.g. for heat pump):	2
Max. short circuit current per MPPT (A):	24/24/24
Max. discharging power (kW):	10,75
Cos phi.:	+/- 0,8, +/- 0,9, 1
AC grid frequency (Hz).:	50/60
AC grid voltage (V):	220, 230, 240, 380, 400, 415
Surge protection AC:	type 2
Surge protection DC:	type 2
Total number of string inputs:	3
Min. temperature ambient (°C):	-10
Max. input current DC (A) total:	48,00
Max. nominal charging power (kW):	10,75
Battery voltage.:	High Voltage
Feed-in phases.:	3
Max. input current per MPPT (A).:	16/16/16
Battery cell chemistry:	LFP

Intrastat country of origin:	China
Intrastat product number (HS-code):	85076000
UN No.:	3480
Manufacturer:	BYD + Kaco
Manufacturer item name:	HVM 19.3*hybrid 12.0 NH3 M3
Classification code:	M4
Dangerous goods class:	9
Dangerous goods transportation category:	2
Dangerous goods description:	LITHIUM ION BATTERIES
Tunnel restriction code:	(E)
Dangerous goods packaging type:	4G
Dangerous goods Weight (net) (kg):	266,000
Brand:	BYD, KACO new energy
Compatible battery manufacturer:	BYD
Manufacturer.:	BYD, KACO new energy
Manufacturer part number: :	B-Box HVM 19.3 + blueplanet hybrid 12.0 NH3-M3

Weight without packaging (kg):

309,700

Accessories

Leaflet HEMS – blueplanet Edition | Home Energy Management System

KACO new energy

Art.-Nr. 0157614

Leaflet HEMS – blueplanet Edition

Home Energy Management System

Manufacturers

Manufacturers

Manufacturers

B-Box HVM 19.3 + blueplanet hybrid 12.0 NH3-M3

Product information

Technical details

Downloads

Battery-Box Premium HVM 2,76 kWh

blueplanet hybrid 12.0 NH3-M3

B-Box Premium HV BCU + Base 2.0

Battery-Box Premium HVM 2,76 kWh

blueplanet hybrid 12.0 NH3-M3

B-Box Premium HV BCU + Base 2.0

I'm already a customer.

Manufacturers

Manufacturers

I'm already a customer.

Manufacturers

B-Box HVM 19.3 + blueplanet hybrid 12.0 NH3-M3

Product information

Technical details

Downloads

Battery-Box Premium HVM 2,76 kWh

blueplanet hybrid 12.0 NH3-M3

B-Box Premium HV BCU + Base 2.0

Battery-Box Premium HVM 2,76 kWh

blueplanet hybrid 12.0 NH3-M3

B-Box Premium HV BCU + Base 2.0

Accessories

Related links

Questions about this product?

More from this manufacturer?

Service / Contact