
PLENTICORE G3 – S
Product information
The PLENTICOINs required for power and function activation must be ordered separately.
With the new PLENTICORE G3 series, KOSTAL is expanding its flexible portfolio centred around the PLENTICOIN. This in-house currency for activating device power and functions is also used here. The inverters are supplied in 3 device variants S, M and L with a basic output of 4 to 15 kW. PLENTICOINs can be used to activate 2 higher power classes, storage utilisation and the intelligent connection of the EV charger. At any time. The new device versions thus enable almost universal application freedom with reduced storage requirements.
Product benefits:
- Activate power and functions as required using PLENTICOINs
- 17 A input current per MPPT
- Full backup with switchover device
Product features:
- AC base power: 4.0 kW
- AC power extension level 1: 5.5 kW
- AC power extension stage 1: 7.0 kW
- Number of MPPT: 2 + 1 (PV / Bat)
- AC connection: 3-phase
- Communication: Wifi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out
- Protection class: IP65
- Cooling: active
- Dimensions: 561 x 409 x 237 mm (H x W x D)
- Weight: 21.8 kg
Activation via PLENTICOINs:
General (all G1/G2 Plenticore plus series, MP plus series, Enector Wallbox):
Activation of the storage function 1 PLENTICOIN
Activation of the Wallbox Smart Features 2 PLENTICOINS
Plenticore G3 series:
Increase by one power class (1 level) within the S / M / L device series 1 PLENTICOIN
Increase to maximum power (2 levels) within the S / M / L device series 1+1 PLENTICOIN
Activation of the memory function 3 PLENTICOINS
Technical details
Topology: | transformerless |
Feed-in phases: | 3 |
Step-Up converter: | yes |
Arc Fault Circuit Interrupter: | no |
Protection degree: | IP65 |
Max. efficiency (%): | 98,00 |
Max. generator power DC (kWp): | 6,00 |
Interface 1: | Ethernet |
Max. input voltage DC (V): | 1.000,00 |
Battery Connection: | AC/DC |
Battery voltage: | High Voltage |
Number of independent MPPT (pcs): | 3 |
AC nominal power (kW): | 4,00 |
Max. AC power (kVA): | 4,00 |
European efficiency (%): | 97,00 |
Interfaces: | Dig. in, Dig. out, Ethernet, RS485, W-Lan |
Interface 2: | W-Lan |
Display: | with display |
Inverter type: | hybrid inverter, string inverter |
Rapid shutdown: | no |
Max. temperature ambient (°C): | 60 |
Integrated DC switch: | yes |
Offgrid usable: | no |
Surge protection AC: | no |
Integrated AC switch: | no |
Start input voltage (V): | 95 |
Shadow management: | yes |
DC connector type: | SUNCLIX |
Backup system full: | yes with supply |
Contact ripple control receiver: | yes |
MPP max. voltage range input (V): | 800,00 |
MPP min. voltage range input (V): | 80,00 |
Backup system light: | no |
Surge protection DC: | no |
Contact for self-consumption optimization (e.g. for heat pump): | 4 |
Decibel: | 39 |
Max. short circuit current per MPPT (A): | 23,8 |
Max. output current (A): | 11,20 |
Max. short circuit current (A) total: | 71,40 |
Charging voltage (V): | 95-650 |
Charging current (A): | 17,00 |
Min. voltage range input (V): | 75 |
Cos phi.: | +/- 0,8, +/- 0,9, 1 |
AC grid voltage (V): | 230, 400 |
AC grid frequency (Hz).: | 50 |
Total number of string inputs: | 3 |
Min. temperature ambient (°C): | -20 |
Max. input current DC (A) total: | 51,00 |
Intrastat country of origin: | Germany |
Intrastat product number (HS-code): | 85044085 |
Manufacturer: | Kostal |
Manufacturer item name: | PLENTICORE S G3 |
Supplier item: | 10543217 |
Brand: | Kostal |
Compatible battery manufacturer: | AXITEC, BYD, LG Energy Solution, Pylontech, ZYC Energy |
Manufacturer part number: : | PLENTICORE G3 – S |
Pack. material: | cardboard box |
Amount per Pallet: | 10 |
Pal. dim. LxBxH (mm): | 1300x800x1200 |
Pal. weight (kg): | 241,20 |
Weight without packaging (kg): | 19,600 |
Height without packaging (mm): | 237,00 |
Length without packaging (mm): | 570,00 |
Width without packaging (mm): | 409,00 |
Product warranty (yr): | 2 |
Warranty provider: | Kostal |
Standard product warranty (yr): | 2 |
Accessories
PROMOTION
Quantity discount possible