PLENTICORE G3 – S
Product information "PLENTICORE G3 – S"
The PLENTICOINs required for power and function activation must be ordered separately.
With the new PLENTICORE G3 series, KOSTAL is expanding its flexible portfolio centred around the PLENTICOIN. This in-house currency for activating device power and functions is also used here. The inverters are supplied in 3 device variants S, M and L with a basic output of 4 to 15 kW. PLENTICOINs can be used to activate 2 higher power classes, storage utilisation and the intelligent connection of the EV charger. At any time. The new device versions thus enable almost universal application freedom with reduced storage requirements.
Product benefits:
- Activate power and functions as required using PLENTICOINs
- 17 A input current per MPPT
- Full backup with switchover device
Product features:
- AC base power: 4.0 kW
- AC power extension level 1: 5.5 kW
- AC power extension stage 1: 7.0 kW
- Number of MPPT: 2 + 1 (PV / Bat)
- AC connection: 3-phase
- Communication: Wifi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out
- Protection class: IP65
- Cooling: active
- Dimensions: 561 x 409 x 237 mm (H x W x D)
- Weight: 21.8 kg
Activation via PLENTICOINs:
General (all G1/G2 Plenticore plus series, MP plus series, Enector Wallbox):
Activation of the storage function 1 PLENTICOIN
Activation of the Wallbox Smart Features 2 PLENTICOINS
Plenticore G3 series:
Increase by one power class (1 level) within the S / M / L device series 1 PLENTICOIN
Increase to maximum power (2 levels) within the S / M / L device series 1+1 PLENTICOIN
Activation of the memory function 3 PLENTICOINS
Technical details
| Topology | transformerless |
|---|---|
| Decibel | 39 |
| Max. generator power DC (kWp) | 6.00 |
| Surge protection DC | no |
| Interface 2 | W-Lan |
| Backup system full | yes with supply |
| Backup system light | no |
| Protection degree | IP65 |
| AC nominal power (kW) | 4.00 |
| Display | with display |
| Arc Fault Circuit Interrupter | no |
| Number of independent MPPT (pcs) | 3 |
| Max. AC power (kVA) | 4.00 |
| Start input voltage (V) | 95 |
| Max. input voltage DC (V) | 1000.00 |
| Max. input current per MPPT (A). | 17 |
| Charging voltage (V) | 95-650 |
| Interface 1 | Ethernet |
| Min. voltage range input (V) | 75 |
| Battery Connection | AC/DC |
| Rapid shutdown | no |
| Step-Up converter | yes |
| Surge protection AC | no |
| Max. short circuit current per MPPT (A) | 23,8 |
| Min. temperature ambient (°C) | -20 |
| Battery voltage | High Voltage |
| Max. efficiency (%) | 98.00 |
| Degree of protection IP | IP65 |
| MPP min. voltage range input (V) | 80.00 |
| Integrated DC switch | yes |
| MPP max. voltage range input (V) | 800.00 |
| Offgrid usable | no |
| Max. input current DC (A) total | 51.00 |
| Total number of string inputs | 3 |
| Contact ripple control receiver | yes |
| Integrated AC switch | no |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| Max. output current (A) | 11.20 |
| European efficiency (%) | 97.00 |
| Max. short circuit current (A) total | 71.40 |
| Shadow management | yes |
| DC connector type | SUNCLIX |
| Charging current (A) | 17.00 |
| Intrastat country of origin | Germany |
|---|---|
| Manufacturer item name | PLENTICORE S G3 |
| Intrastat product number (HS-code) | 85044085 |
| Manufacturer | Kostal |
| Width incl. packaging (cm) | 48.50 |
|---|---|
| Height incl. packaging (cm) | 29.00 |
| Pal. dim. LxBxH (mm) | 1300x800x1200 |
| Weight incl. packaging (Kg) | 21.600 |
| Pack. material | cardboard box |
| Length incl. packaging (cm) | 65.00 |
| Pal. weight (kg) | 241.20 |
| Amount per Pallet | 10 |
| Width without packaging (mm) | 409.00 |
|---|---|
| Weight without packaging (kg) | 19.600 |
| Length without packaging (mm) | 570.00 |
| Height without packaging (mm) | 237.00 |
Accessoires
