BYD HVS+ 10.2 + PLENTICORE M G3
Product information "BYD HVS+ 10.2 + PLENTICORE M G3"
CAUTION:
UN 3480 Lithium-ion batteries, 9, (E)
Transport category 2
The 3 PLENTICOINs required to activate the storage function must be ordered separately.
Combination with components from the previous HVS series is not possible.
The new BYD Energy app including the latest firmware (from V1.28.0) is required for commissioning
The included RJ45 termination connector for the data bus must be pre-assembled on-site. To do this, insert and crimp a wire jumper between pins 1 and 6 (viewed from above on the flat connector side with the pin contact surfaces, cable entry facing down, pins ascending from left to right). An actual resistor is not required.
With the PLENTICORE G3 series, KOSTAL is expanding its flexible portfolio centred around the PLENTICOIN. This in-house currency for activating device power and functions is also used here. The inverters are supplied in 3 device variants S, M and L with a basic output of 4 to 15 kW. PLENTICOINs can be used to activate 2 higher power classes, storage utilisation and the intelligent connection of the EV charger. At any time. The 3 device versions thus enable almost universal application freedom with reduced storage requirements. In addition to the proven features and key data, the new HVS+ series from BYD utilises an improved BCU. This can be used flexibly for the storage modules of the HVB, HVS+ and HVM+. The new automatic SOC balancing optimiser eliminates the need to manually adjust the charge level during initial installation and expansion.
Product benefits:
- Activate power and functions as required using PLENTICOINs
- 17 A input current per MPPT
- Full backup with switchover device
- Automatic SOC balancing during initial installation or expansion
- Faster cable installation thanks to plug connectors
Product features System:
- AC base power: 8.5 kW
- AC power extension stage 1: 10.0 kW
- AC power extension stage 1: 12.5 kW
- Feed-in phases: 3
- AC mains voltage: 400 V
- Number of MPPT: 2 + 1 (PV / Bat)
- Max. DC input voltage: 1000 V
- DC plug type: Sunclix
- Communication: Wifi, 2 x LAN, RS485, 4 x Dig-In (FRE), 4 x Dig-Out
- Protection class: IP65
- Cooling: active
- Dimensions: 561 x 409 x 237 mm (H x W x D)
- Weight: 22.3 kg
Product features Memory:
- Battery capacity (usable): 10.24 kWh
- Storage type: High-voltage
- Nominal voltage: 409.6 V
- Extension time window: unlimited
- Number of storage modules in one unit: 2 to 5 battery modules
- Number of units in parallel: 3
- Cell chemistry: LFP
- COM connections: RJ45
- BAT connections: MC4
- Protection class: IP55
- Dimensions: 1227 x 610 x 282 mm (HxWxD)
- Weight: 168.6 kg
Activation via PLENTICOINs:
Plenticore G3 series:
Increase by one power class (1 level) within the S / M / L device series 1 PLENTICOIN
Increase to maximum power (2 levels) within the S / M / L device series 1+1 PLENTICOIN
Activation of the storage function 3 PLENTICOINS
Activation of the convenience function for the Enector Wallbox 2 PLENTICOINS
Scope of delivery:
• 1 x Kostal Plenticore M G3 hybrid inverter (item 0155066)
• 1 x BYD B-Box HV+ BCU + Base (item 0161507)
• 4 x BYD HVS+ storage modules (item 0161506)
• 1 x Kostal KSEM G2 smart meter (item 0151118)
Wichtige technische Daten
| Dangerous goods transportation category | 2 |
|---|---|
| Dangerous goods description | LITHIUM ION BATTERIES |
| Tunnel restriction code | (E) |
| Dangerous goods Weight (net) (kg) | 154.000 |
| Classification code | M4 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
Downloads
-
SMART ENERGY METER G20151118
-
Battery-Box HVS+0161506
-
PLENTICORE G3 – M0155066
-
B-Box HV-BCU + Base0161507
-
SMART ENERGY METER G20151118
-
PLENTICORE G3 – M0155066
Technical details
| Topology | transformerless |
|---|---|
| Decibel | 39 |
| Surge protection DC | no |
| Max. input current DC (A) total | 65.00 |
| Max. short circuit current per MPPT (A) | 23,8\/23,8\/42 |
| Backup system full | yes with supply |
| Backup system light | no |
| Max. short circuit current (A) total | 89.60 |
| Display | with display |
| Arc Fault Circuit Interrupter | no |
| Number of independent MPPT (pcs) | 3 |
| Min. temperature ambient (°C) | -10 |
| Start input voltage (V) | 95 |
| Usable capacity (kWh) | 10.24 |
| Max. input voltage DC (V) | 1000.00 |
| Rapid shutdown | no |
| Capacity extendable later | yes without restriction |
| Surge protection AC | no |
| Max. output current (A) | 20.00 |
| Battery voltage | High Voltage |
| Max. efficiency (%) | 98.00 |
| Max. AC power (kVA) | 8.50 |
| Battery cell chemistry | LFP |
| Integrated DC switch | yes |
| MPP max. voltage range input (V) | 800.00 |
| Protection degree | IP55 |
| Total number of string inputs | 3 |
| Max. generator power DC (kWp) | 12.75 |
| AC nominal power (kW) | 8.50 |
| Contact ripple control receiver | yes |
| Integrated AC switch | no |
| Contact for self-consumption optimization (e.g. for heat pump) | 4 |
| European efficiency (%) | 97.00 |
| MPP min. voltage range input (V) | 170.00 |
| Shadow management | yes |
| Max. input current per MPPT (A). | 17\/17\/30 |
| Manufacturer item name | HVS+ 10.2*PLENTICORE M G3 |
|---|---|
| Intrastat country of origin | China |
| Dangerous goods transportation category | 2 |
| Dangerous goods description | LITHIUM ION BATTERIES |
| Manufacturer | BYD + Kostal |
| Tunnel restriction code | (E) |
| Dangerous goods Weight (net) (kg) | 154.000 |
| Classification code | M4 |
| Intrastat product number (HS-code) | 85076000 |
| Dangerous goods class | 9 |
| Dangerous goods packaging type | 4G |
| UN No. | 3480 |
| Weight incl. packaging (Kg) | 206.900 |
|---|
| Weight without packaging (kg) | 190.500 |
|---|
